Nady Audio PM-200A Owner's Manual

Powered personal stage monitor

Download this manual

Enlarged version

SERVICE FOR YOUR NADY AUDIO PRODUCT

(U.S.) Should your NADY AUDIO product require service, please contact

the Nady Service Department via telephone at (510) 652-2411, or e-mail at

service@nady.com.

(International) For service, please contact the NADY AUDIO distributor in

your country through the dealer from whom you purchased this product.

DO NOT ATTEMPT TO SERVICE THIS UNIT

YOURSELF AS IT CAN BE DANGEROUS AND

WILL ALSO VOID THE WARRANTY.

NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608

Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com

OWNER'S MANUAL

PM-200A

Powered Personal Stage Monitor

Page 1 SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact OWNER’S MANUAL the Nady Service Department via telephone at (510) 652-2411, or e-mail at service@nady.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product.
Page 2 Power................. 2 x 50W RMS @ 8Ω (Total 100W RMS) 2 x 75W RMS @ 4Ω (Total 150W RMS) Please read this manual carefully to get the most out of your new unit. Thanks for selecting NADY Frequency Response..................20Hz – 50KHz AUDIO as your choice in personal stage monitors.
Page 3: Important Safety Instructions
B. Objects have fallen into, or liquid has been spilled onto the product. On the bottom panel of the PM-200A is a 5/8” dia. socket for mounting the PM-200A on a mic C. The product has been exposed to rain.
Page 4 ﬁxed at 10 KHz and 120Hz respectively. Power Led. The MID control has a peaking response at 2.5KHz. The EQ is a valuable feature of the PM-200A as it allows the user to control the tonal characteristics of their monitor mix. For example, boost-...