JBL VRX932LAP Brochure & Specs

Key Features:

Built-in JBL DrivePack ® DPC-2 amplifier
module designed by Crown provides 1750
Watts of peak power. DSP-based resident
input module provides system optimization
and EQ.
JBL's exclusive neodymium magnet
Differential Drive woofer for high-power
®
capacity and light-weight.
VRX932LAP features 3 x 2408J Annular
Ring Diaphragm HF drivers. The 2408
represents the latest in JBL Professional
compression driver design.
Constant Curvature waveguide for
unprecedented array coherence.
Integral rigging hardware for simple
connection of enclosures and optional
array frame. Dual angle pole socket for
aiming flexibility.
Array Configuration Selector permits "array
shading".
Application:
Music playback and sound
reinforcement in mid-size venues.
Entertainers, corporate A/V professionals and
sound system hire companies.
Permanent Installation.
The VRX932LAP is a powered, light-
weight, compact 12" two-way line-array
speaker system designed for use in arrays
of up to five units. VRX932LAP is the ideal
choice when line-array performance is
needed but the venue size doesn't call for
the very long-throw characteristics of larger
line-arrays and a fast and easy setup is
vital.
The Constant Curvature waveguide
mounts three compression drivers on a
continuous arc. When additional
VRX932LAP speakers are added to the
array the uninterrupted arc continues. In
effect, all the drivers work together as if
they were a single driver on a very long
waveguide. Since there are three drivers in
each VRX932LAP, the combined power
handling and acoustic output of the system
is far greater than a single driver could
achieve.
VRX932LAP uses "amplitude shading" to
shape the coverage of the array. Switches
on the input plate allow, for example, the
upper box in an array to reach a distant
balcony while the lower box is shaded
back to reduce excessive level at the front
of the listening area. This yields to a more
coherent sound field and less feedback
problems.
One or two VRX932LAP's may also be
used on a tripod or over subwoofers. The
integrated rigging hardware is used to
securely lock the array together while the
dual-angle pole socket provides aiming
flexibility.
As many as five VRX932LAP speaker
systems may be suspended in a single
array for a nominal vertical coverage of up
to 75°. Suspended applications require the
JBL VRX-AF array frame or eye bolts
(available separately).
VRX932LAP
The VRX932LAP is compatible with VRX918SP/VRX918S and SRX781S subwoofers.
The VRX932LAP is manufactured and sold under U.S. patents 5,748,760; 6,112,847;
6,394,223; 6,847,726; 6,768,806; 6,774,510; and D483,743
Specifications:
Frequency Range (-10 dB): 57 Hz - 20 kHz
Frequency Response (±3 dB): 75 Hz - 20 kHz
Maximum Peak Output
Bandpass Nominal Impedance: LF: 2 x 2 ohms
DPC-2 Internal Amplification
Output (at nominal load): 1750 Watts Peak, 875 Watts Continuous
DPC-2 Output as (Continuous IEC
shaped pink noise into rated load
DPC-2 Output Section: LF: Dual-Bridged Technology™, Class D
Audio Input Connector: XLR with loop through
AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz
AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
AC Current Requirements: 6A per system at 120V, 3A per system at 240V
Suspension / Mounting: Optional VRX-AF line-array frame kit, 10mm forged eyebolts or
Dimensions (H x W x D): 349 mm x 597 mm x 444 mm
1 Measured with IEC shaped noise in free field conditions.
JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this
reason, any current JBL product may differ in some respect from its published description, but will always equal or
exceed the original design specifications unless otherwise stated.
Coverage Pattern: 100° x 15° nominal
: 136 dB SPL at 1m
1
LF Driver: 1 x JBL 2262FF 305 mm (12 in) dual voice coil Differential
Drive woofer with neodymium-magnet
®
HF Driver: 3 x JBL 2408J, 38 mm (1.5 in) voice coil neodymium
compression driver
HF: 4 ohms
impedance): LF: 750 Watts, HF: 125 Watts
HF: Bridged Class D
User Controls: Input Attenuator (0-16 dB)
ACS (Array Configuration Selector),
HF level adjustment (+3 dB, 0 dB, -3dB)
Signal Processing: DSP based, resident in Input Module
System Management: DSP based limiters for mechanical and thermal protection.
AC Line Voltage: User selectable: 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
Enclosure: 25/15 mm birch plywood.
internal dual angle 36mm pole mount cup for pole or tripod
mounting
Finish: Black DuraFlex™ finish
Grille: Powder coated, black, 16-gauge perforated steel with acoustically
transparent foam
(13.75 in x 23.5 in x 17.5 in)
Net Weight: 24 kg (52 lb)
Optional Accessories: VRX-AF array frame, eyebolt kit part #229-00017
SS2-BK tripod speaker stand
SS3-BK satellite speaker pole
SS4-BK adjustable satellite speaker pole to be used with the
VRX918SP and SRX718S only.
12" Two-Way
Powered Line Array
Loudspeaker System