Page 1
WorkingPro ™ Series WorkingPro ™ Series BASS SPEAKER ENCLOSURES BASS SPEAKER ENCLOSURES...
Page 3
I m p o r t a n t S a f e t y I n s t r u c t i o n s This symbol warns the user of dangerous voltage levels localized within the enclosure. This symbol advises the user to read all accompanying literature for safe operation of the unit.
® ™ Congratulations on your decision to make a WorkingPro™ Inside this owner’s manual you’ll find specifications, bass speaker enclosure part of your bass amplification features, and usage suggestions for every WorkingPro™ system. Since 1984, we here at SWR ® have been putting bass speaker enclosure we make.
Generally, you will want to SPECIFICATIONS connect your amplifier WorkingPro™ 4x10 speakers with a total impedance load equal to the minimum Power Handling: 400 watts RMS impedance rating your Impedance: 8 ohms amplifier. Operating below the Frequency Response & SPL: minimum impedance rating can 100 dB SPL @ 1W1M (–3dB @ 50 Hz and 18KHz) easily overheat the amplifier and...