Editing A Number/Name; Stored In Memory; Deleting A Number/Name Stored In Memory; Dialing A Memory Number - Radio Shack Cordless Phone Owner's Manual

Ô Ô
NOTE
• Press OFF at any time to exit directory.
• While setting, if you do not press any button
within about 20 seconds, the normal display
returns and no setting is stored.
• When memory is full the screen displays
MEMORY FULL
, an error tone sounds, and you
will not be able to store a new number until
you delete a stored number.
8
4. If the selected location is empty,
ENTER NAME
appears.
5. To enter a name, use the number keys.
Using the chart below, enter up to 15
characters for the name you're storing with
the number. Use f to backspace and make
corrections; use g to advance and add a
space.
Key Number of Presses
Pad
1 2 3 4
Button
1 1
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S
8 T U V 8
9 W X Y Z
0 0
* *
,
# & , -
6. When you finish entering the name,
press or
SELECT PROG/CHAN
ENTER NUMBER.
screen displays
7. Enter the telephone number. Use f to
backspace and make a correction.
Press to insert a pause
REDIAL/PAUSE
in the dialing sequence. You can add
more pause entries for a longer pause.
8. Press or
SELECT PROG/CHAN
your entry. The screen displays
DISTINCT RING?
and the current setting.
9. Press f or g to change the setting.
Y
Choose (Yes) if you wish the phone to
alert you to calls from this number by
changing to a distinctive ringing pattern
after the first ring. Choose
normal ringing pattern.
10. Press or
SELECT PROG/CHAN
confirm your selection. If you chose
is displayed with the memory entry.

Editing a Number/Name

Stored in Memory

1. Press . The screen displays
MEM
ENTER 0-9
.
2. Press the memory location key of the
entry you wish to edit. If the location is
empty, the handset sounds an error
tone. Press another location key.
3. When the screen displays the number
you want to edit, press
SELECT
press f or g until
EDIT
flashes.
4. Press . The screen displays the
SELECT
name and number. The flashing cursor
appears at the end of the name. Use
f or g and the dial pad keys to edit the
name. Press
the number. Press
to edit the Distinctive Ring setting.
5. Press
SELECT
information.
Deleting a Number/Name
Stored in Memory
1. Press
MEM
ENTER 0-9
2. Press the memory location key of the
5 6
entry you wish to delete.
3. When the screen displays the number
you want to delete, press
press g until
4. Press
SELECT.
ERASE NO YES
5. Press g until
7
6. Press
SELECT.
9

Dialing a Memory Number

1. Press
MEM
ENTER 0-9
. #
2. Press the memory location key of the
entry you wish to dial.
. The
3. When the screen displays the number
you want to dial, press
OR
press
SELECT
4. Press
SELECT
to store
dials the number.

Chain-Dialing Service Numbers

For quick recall of numbers for special
services (such as bank-by-phone), store
each group of numbers in its own memory
location. Dial the service's main number
first. Then, at the appropriate place in the
N
(No) for a
call, press
MEM
location where the additional information is
stored. Press
to
Y
ª
,
T
ELEPHONE
This cordless phone can store an additional
40 telephone numbers with names, each up
to 16 digits long. Entries are stored
alphabetically. For consistency with
Caller ID entries, you may wish to enter last
names first.
Storing a Number/Name in the
Directory
1. Lift the handset and press
The screen displays
. Then
2. Press
SELECT
ENTER NAME
to move on to edit
SELECT
to move on
SELECT
to save the edited
. The screen displays
.
. Then
SELECT
ERASE
flashes.
The screen displays
and the number.
YES
flashes.
. The screen displays
.
TALK.
DIAL
. flashes.
. The phone automatically
and enter the number for the
.
TALK
D
IRECTORY
.
PROG/CHAN
. Ô
DIRECTORY
. The screen displays
.