Operation; Turning Power On And Off; Changing Channels; Adjusting The Volume - ZaapTV HD409N User Manual

2. OPERATION

Turning Power On and Off

Plug in the supplied power adapter to the electrical outlet and to the back of HD409N set-top box or use a remote
control to turn it on or off (standby). When using the remote control, pressing the POWER button once will put HD409N
set-top box on a standby mode while pressing and holding the same button for approximately 3 seconds will turn it
off.

Changing Channels

You can change channels in three ways:
Press CHANNEL + or – on the remote control to step through the channel selection.

Enter the number of the channel you wish to view using the number keys on the remote control.

Select the channel in the Interactive Program Guide.


Adjusting the Volume

Press VOLUME + or – on the remote control to adjust the volume. When you adjust the volume, the volume scale is
displayed on the screen. Press MUTE on the remote control to toggle the sound on and off. For best audio quality when
using the analog L/R (var.) volume controlled audio outputs, use the remote control to set the HD409N set-top to
approximately three quarters of the maximum volume level and then adjust the audio levels on external devices such
as your TV or A/V receiver. When using the analog L/R (fixed) audio outputs or any of the digital audio outputs (HDMI,
optical or coaxial digital audio) adjust the audio levels on your external device such as your TV or A/V receiver. You may
HD409N-User's Guide
13/ 38