Honda Accord Accessory HandsFreeLink 2008 User's Information Manual page 27

A paired phone will not link/connect.
Check
Phone and Accessory HFL have power.
Phone and Accessory HFL have had adequate
time to "find" each other.
Accessory HFL was not "barred" from the
phone.
Phone is set to automatically link/connect to the
Accessory HFL.
Accessory HFL was not inadvertently set back to
the default (is not set to automatically
link/connect to the Accessory HFL).
I can't receive incoming calls.
Check
Vehicle's ignition is ON.
You are pressing the correct button on
Accessory HFL to answer the call.
Phone is paired and linked to Accessory HFL.
Phone is not outside of the vehicle.
© 2008 American Honda Motor Co., Inc. - All Rights Reserved.
Possible Solutions
Make sure that the phone and vehicle ignition are ON. Also make sure that
your phone battery is charged.
Allow at least 60 seconds for the link to take place.
Use the Accessory HFL "Set Up" command at the main menu and then the
"Select Phone" command to link to the desired phone.
See your phone's user guide for Bluetooth settings.
See your phone's user guide for Bluetooth settings.
Possible Solutions
Turn your vehicle ignition to the ON position.
Press the PHONE button to answer an incoming call and not the VR button
on Accessory HFL.
Use the Accessory HFL "Set Up" command at the main menu and then
"Select Phone" command to link to the desired phone.
Place the phone inside of the vehicle to ensure a good connection.
Troubleshooting
27