• Keep these instructions for future reference. unused for long periods of time to prevent damage to this product. • Heed all warnings on the product and in the owner’s guide The Audioengine team is dedicated to bringing you the highest quality Follow all instructions. • Refer all servicing to qualified service personnel. listening experience possible. The Audioengine D2 is designed with the • Do not use this apparatus near water or moisture. Do not...
Cleaning The D2 can process digital audio at any bit depth up to 24 bits, and any sample rate up to 192KHz. The D2 USB input can accept a USB Your D2 components are not water-resistant, so it’s important that they audio stream from your computer or other USB source device.
D2 Receiver A5+ or AV Receiver D2 Sender Step 2 -- Connect the D2 power adapter to the D2 Sender, and to an AC Audioengine D2 - Con g A power source. Note: Verify that your source is set to PCM Stereo.
Electrical Troubleshooting Full Scale Output 2.0V RMS • I have connected my D2 Sender and Receiver as shown, but there is Frequency Response 10 Hz - 30 kHz, +/- 0.5db no music output. S/N Ratio (DC to 20 kHz) >115 dB...
This symbol is only valid in the By disposing of this product correctly, you will help Audioengine designs and builds innovative audio products with all European Union. to conserve the environment and human health that your music in mind. Great sound, simple but elegant designs, high-...
Need help?
Do you have a question about the D2 and is the answer not in the manual?
Questions and answers