Adding Detailed Information To A Service Template - 3Com PalmPilot Handbook

Adding Detailed Information to a Service Template

If you are using one of the pre-defined service templates, you will
probably only need to enter your user name and telephone
number. If you are creating a new service template, you may need
to provide additional information to connect to your ISP or dial-in
server. You use the Details dialog to add additional information to
a selected service template.
To open the Details dialog:
1. From the Network Preference screen, tap the word Service.
The pick list appears, listing all of the PalmPilot organizer's
available pre-defined service templates.
2. Tap to select the service you want to use.
3. Tap the Details button. The Details dialog appears, as shown
in the following diagram:
To select a connection type:
1. Tap the text to the right of the words, "Connection type." The
pick list appears, listing the following connection types:
PPP. Point-to-Point protocol.
SLIP. Serial Line Internet Protocol
CSLIP. Compressed Serial Line Internet Protocol
2. Tap to select the connection type you want to use.
page
46
Select connection type
Primary IP address
Secondary IP address
PalmPilot Professional Handbook