Download Print this page

DeLonghi DRY VACUUM CLEANER Operating Instructions

Advertisement

Quick Links

DRY VACUUM CLEANER
OPERATING INSTRUCTIONS

Important information

• Read the instruction booklet carefully
• Before using, check that the mains voltage corresponds to
the voltage indicated on the specifications label under the
handle.
• Connect your cleaner only to power outlets with a minimum
of 10 amps and make sure the outlet is earthed. For
machines with double insulation (see the
specifications label), earthing is not necessary.
• Always disconnect the appliance from mains outlet
when not in use or before any maintenance or care
operation.
• Do not clean the appliance with benzine or other solvents.
Use soapy water only.
• Do not tug on the power cord, or the machine itself, to
disconnect the appliance from mains outlet.
• Do not leave the appliance unattended while it is running.
Keep it away from the reach of children and persons unfit to
use it.
• Do not run the appliance over the power cord as this may
damage the insulating sheath.
• Do not use to pick up flammable or corrosive liquids and
liquids in general.
• Do not use to pick up matches, hot ash, or burning cigarette
ends.
• Do not attempt to use the appliance if it appears to be faulty.
• To repair or if the power cable is damaged and requires
replacement, contact the dealer or authorised service centre
in order to avoid compromising the efficiency of your
appliance and guarantee the validity of the guarantee. For
the same reasons, you are always recommended to use
original spare parts.
• During operation a significant quantity of air is blown out
from the air exhaust grill, which may be an annoyance if
directed towards the person, especially the face.
8
symbol on the

Advertisement

loading

Summary of Contents for DeLonghi DRY VACUUM CLEANER

  • Page 1: Important Information

    DRY VACUUM CLEANER OPERATING INSTRUCTIONS Important information • Read the instruction booklet carefully • Before using, check that the mains voltage corresponds to the voltage indicated on the specifications label under the handle. • Connect your cleaner only to power outlets with a minimum of 10 amps and make sure the outlet is earthed.
  • Page 2: Preparing For Use

    Description 1) Exhaust port 2) Motor unit 3) ON/OFF switch 4) Catch 5) Suction inlet port 6) Tank 7) Motor-protection paper bag 8) Extension tube 9) Flexible hose 10) Carpet and floor brush with two settings 11) Multi-purpose nozzle 12) Crevice tool Preparing for use Remove the motor unit by pulling the catches outwards to release.
  • Page 3: Tools And Accessories

    Connect the flexible hose to the inlet port of your cleaner by rotating the hose coupling clockwise until securely attached. Fit one end of the extension tube to the handgrip and the desired tool to the other end. Plug in the appliance and switch it on by depressing the ON/OFF button on the cover.
  • Page 4 Care and maintenance of the appliance CAUTION: Always disconnect the appliance from mains outlet before performing any cleaning or maintenance operation. Always remove cover and empty out the tank after use to ensure maximum hygiene and a long working life for your appliance.