Page 1
573441 GB 31-01-2001 14:34 Pagina 1 YTIC HEA YTIC HEA RADIA TEUR A COMBUSTION CA YTIQUE RADIA TEUR A COMBUSTION CA YTIQUE STUF A CA ALITICA STUF A CA ALITICA KATALUTIKH QERMASTRA KATALUTIKH QERMASTRA...
573441 GB 31-01-2001 14:34 Pagina 2 ELECTRICAL CONNECTION (UK ONLY) If your appliance comes fitted with a plug, it will incor- If the plug is a moulded-on type, the fuse cover must be porate a 13 Amp fuse. If it does not fit your socket, the re-fitted when changing the fuse using a 13 Amp Asta plug should be cut off from the mains lead, and an app- approved fuse to BS 1362.
573441 GB 31-01-2001 14:34 Pagina 3 CATALYTIC HEATER Technical Data Type Category Maximum Medium Gas pressure Input Input Input see rating label 2.35 1.85 28÷30 mbar This appliance is designed to operate with Butane, propane or mix LPG at nominal pressure: 28 ÷...
573441 GB 31-01-2001 14:34 Pagina 4 bles. If a leak is found, turn the gas off and inform your Dealer. DO NOT use the heater again until it has been inspected by your Dealer. NEVER USE MATCHES TO FIND LEAKS. GENERAL SAFETY INSTRUCTIONS Gas bottle Gas Bottle with 15 kg of maximum capacity can be installed.
573441 GB 31-01-2001 14:34 Pagina 5 or damaged. In any case replace the tube every 5 years. When connecting the pressure regulator to the gas bottle avoid undue twisting of the flexi- ble tubing. A 28 ÷ 30 mbar (11.2 in w.g.) pressure regulator for Butane or Propane complying to local standard must be connected to the appliance with the above tubing, using suitable tube clips.
VENTILATED CATALYTIC HEATER Electrical connection Before using the appliance check that your supply voltage is the same as that shown on the rating label of the unit.