Honda 2009 Ridgeline Owner's Manual page 375

Honda 2010 ridgeline truck owners manual
Hide thumbs Also See for 2009 Ridgeline:
Table of Contents

Advertisement

Main Menu
The numbers in the illustration show
you the order to connect the jumper
cables.
3.
Connect one jumper cable to the
positive ( ) terminal on your
vehicle's battery. Connect the
other end to the positive ( )
terminal on the booster battery.
Table Of Contents
BOOSTER
BATTERY
4.
Connect the second jumper cable
to the negative ( ) terminal on
the booster battery. Connect the
other end to the grounding strap
as shown. Do not connect this
jumper cable to any other part of
the engine.
2009 Ridgeline
5.
If the booster battery is in another
vehicle, have an assistant start
that vehicle and run it at a fast idle.
Start the vehicle. If the starter
6.
motor still operates slowly, check
that the jumper cables have good
metal-to-metal contact.
7.
Once your vehicle is running,
disconnect the negative cable from
your vehicle, then from the
booster battery. Disconnect the
positive cable from your vehicle,
then from the booster battery.
Keep the ends of the jumper cables
away from each other and any metal
on the vehicle until everything is
disconnected. Otherwise, you may
cause an electrical short.
Jump Starting
371

Advertisement

Table of Contents
loading

Table of Contents