Main Menu
Table Of Contents
Replacing Rear Bulbs
1.
Open the trunk.
2.
Remove the fasteners from the
trunk lining. To remove a fastener,
push on the center of the head
until it pops in, then pull the
fastener out.
3.
Pull the lining back.
4.
Determine which bulb is burned
out: turn signal or back-up light.
2009 S2000
SOCKET
BULB
5.
Remove the socket by turning it
one-quarter turn counterclockwise.
6.
Remove the burned out bulb by
pulling it straight out of its socket.
Lights
CONTINUED
183