Table of Contents
Advertisement
Main Menu
3.
Push and hold the front of the
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
4.
Release the switch, and within 5
seconds, turn the ignition switch
to the LOCK (0) position.
Table Of Contents
To program the Drive Lock mode:
Locks all doors and tailgate when the
vehicle's speed reaches about 9 mph
(15 km/h).
1.
Make sure the shift lever is in the
Park (P) position.
2.
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
2009 CR- V
Door Locks
3.
Push and hold the brake pedal,
and move the shift lever out of the
Park (P) position.
Push and hold the front of the
4.
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
5.
Release the switch and, within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
Move the shift lever to the Park
(P) position.
6.
Turn the ignition switch to the
LOCK (0) position.
85
Advertisement
Table of Contents
