Table of Contents
Advertisement
Main Menu
4.
Connect the second jumper cable
to the negative ( ) terminal on
−
the booster battery. Connect the
other end to the stud bolt on the
engine side as shown. Do not
connect this jumper cable to any
other part of the engine.
Table Of Contents
5.
If the booster battery is in another
vehicle, have an assistant start
that vehicle and run it at a fast idle.
Start your vehicle. If the starter
6.
motor still operates slowly, check
that the jumper cables have good
metal-to-metal contact.
7.
Once your vehicle is running,
disconnect the negative cable from
your vehicle, then from the
booster battery. Disconnect the
positive cable from your vehicle,
then from the booster battery.
Keep the ends of the jumper cables
away from each other and any metal
on the vehicle until everything is
disconnected. Otherwise, you may
cause an electrical short.
2009 CR- V
Jump Starting
321
Advertisement
Table of Contents
