Lamp Replacement - BenQ PB8250 Service Manual

Lamp Replacement

Use and Replacement of the Lamp
When the Lamp Indicator lights up red or a message appears suggesting it is time to replace the lamp,
please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the
projector and in some instances the lamp may explode.
Lamp Replacement
To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord
before changing the lamp. To reduce the risk of severe burns, allow the projector to cool for at least
45 minutes before replacing the lamp.
To reduce the risk of injuries to fingers and damage to internal components, use caution when
removing lamp glass that has shattered into sharp pieces.
55