Using The Cooktop; 9 Cooking Areas; 9 Using The Cooktop Elements - LG LRE3027ST Owner's Manual

USING THE COOkTOP

COOkING AREAS
The cooking areas on your range are identified by
permanent circles on the glass cooktop surface. For the
most efficient cooking, fit the pan size to the element
size.
Pans should not extend more than 1/2 to 1-inch be-
yond the cooking area.
When a control is turned on, a glow can be seen through
the glass cooktop surface. The element will cycle on
and off to maintain the preset heat setting, even on
Hi.
For Model: LRE3027, LRE3085
WARM
SINGLE
ZONE
DUAL
For Model: LRE3083
WARM
SINGLE
ZONE
DUAL
For Model: LRE3021
SINGLE
DUAL
SINGLE
DUAL
SINGLE
SINGLE
SINGLE
SINGLE
Hot surface indicator
HS (Hot Surface) will appear in the display once the
element is turned off or during the self clean cycle. The
HS indicator will stay on until the surface has cooled to
approximately 150°F (66°C) or when the self clean cycle
ends.
cAUtiON
It is normal for the surface elements to cycle on and
off during cooking, even on higher settings. This will
happen more frequently if cooking on a lower tem-
perature setting.
Using the cooktop elements
To turn on a SINGLE element
SINGLE
1. Press the ON/OFF button that controls the element
that you would like to use.
+
2. Press the button once to adjust the element tem-
perature to Hi, or the
element temperature to Lo.
– / +
3. Use the buttons to adjust the element tem-
perature settings. The element temperature settings
are adjustable at all times.
4. To turn off the element after cooking, press the ON/
OFF button once.
NOtE
• Hi is the highest temperature available.
• Lo is the lowest temperature available.
+
• Press and hold the or
through the temperature settings.
USiNg thE cOOktOp
–
button once to adjust the
–
buttons to quickly scroll
19