Radio Shack Weatheradio Owner's Manual page 33

Problem(s)
No weather broadcast
when you press
WEATHER .
The radio is not respond-
ing properly to NWS
weather alert broadcasts.
Make sure the telescoping
antenna is fully extended.
Make sure the Weatheradio is
set to the NOAA channel that is
being broadcast in your area.
See "Programming" on Page 13.
Make sure you programmed the
correct FIPS code(s) into the
Weatheradio's memory. See
"Programming" on Page 13.
Make sure
appears. See "Using the Alert
Function" on Page 24.
Make sure the Weatheradio is
set to receive new alert types.
See "Manually Testing the Alert
Tone" on Page 21.
Troubleshooting
Suggestion(s)
:($7+(5#$/57#21# :($7+(5#$/57#21#
:($7+(5#$/57#21# :($7+(5#$/57#21#
33