Gefen GTV-HT-AUDPROCN User Manual

4x1 av processor with amp
Hide thumbs Also See for GTV-HT-AUDPROCN:

Advertisement

Quick Links

4x1 AV Processor
with Amp
GTV-HT-AUDPROCN
User Manual
gefentv.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GTV-HT-AUDPROCN and is the answer not in the manual?

Questions and answers

Summary of Contents for Gefen GTV-HT-AUDPROCN

  • Page 1 4x1 AV Processor with Amp GTV-HT-AUDPROCN User Manual gefentv.com...
  • Page 3: Asking For Assistance

    ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday through Friday, Pacific Time Write To: Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 gefentv@gefen.com http://www.gefen.com/gefentv Notice Gefen, LLC reserves the right to make changes in the hardware, packaging, and any accompanying documentation without prior written notice. 4x1 AV Processor with Amp is a trademark of Gefen, LLC HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are registered trademarks of Dolby Laboratories. © 2013 Gefen, LLC. All rights reserved. All trademarks are the property of their respective owners. Rev A1...
  • Page 4 CONTENTS...
  • Page 5 INTRODUCTION Congratulations on your purchase of the 4x1 AV Processor w/ Amp. Your complete satisfaction is very important to us. Gefen TV Gefen TV is a unique product line catering to the growing needs for innovative home theater solutions. We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line and hope that you find your solutions. Don’t see what you are looking for here? Please call us so we can better assist you with your particular needs. The Gefen TV 4x1 AV Processor with Amp The GefenTV 4x1 AV Processor with Amp is a powerful yet compact solution for all of your audio/video needs, offering an easy-to-use alternative to over-complicated Home Theater Receivers. It connects four HDMI sources to a Hi-Def display, and supports 1080p Full HD, HDCP, Deep Color, Lip-Sync, and 3DTV. The audio from the HDMI inputs, the coaxial and optical digital inputs, and the Left and Right analog inputs is decoded by the processor and outputted through its built in seven channel audio amplifier or its seven pre-amp outputs. A pre-amp level output to drive a Powered Subwoofer is also provided. Up to 5.1 channels of LPCM, Dolby® Digital, and Dolby® Pro Logic II can be decoded. The power amplifier delivers up to 50 watts per channel RMS and features 5-way binding post speaker terminals. Two sets of front left and front right amplified and pre-amp level outputs are provided to help enhance the sound quality of the system via bi-amplification. Users can also select audio independent of video. When a digital or analog audio input is selected, the previously selected HDMI source continues to output to the display, allowing users to watch the video source while listening to a different audio content. The 4x1AV Processor with Amp features an easy-to-read LCD display and extensive features such as switching for four HDMI sources, trigger in and out terminals and individual controls for size, distance, and output level of each speaker The Home Theater Audio Processor can be controlled via its front panel push buttons, the included IR remote, or its RS-232 port. How It Works Connect the GefenTV 4x1 AV Processor with Amp to up to four HDMI sources, using the supplied HDMI cables. Use a TOSLINK® and an S/PDIF cable to connect two digital audio...
  • Page 6 INTRODUCTION READ THESE NOTES BEFORE INSTALLING OR OPERATING THE 4X1 AV PROCESSOR WITH AMP • The Digital Audio Decoder for HDMI has 8 RCA outputs. A maximum of 6 discrete channels of audio can be output via these connectors. 2 connectors are available for bi-amping the front left and right channels. • This product was intended for use with a separate audio amplifier. The RCA output connectors on the rear panel will require the use of an audio amplifier to produce adequate volume output. • This unit will support the following audio formats: LPCM (up to 6 channels) Dolby Digital (AC-3 up to 6 channels) Dolby Pro Logic Dolby Pro Logic II • This unit features multiple EDID (display information) modes which will determine what audio formats can be used. For more information please see page 36. • This unit will accept sources that use Deep Color.
  • Page 7 INTRODUCTION Features • Supported HDMI Features: • Resolutions up to 1080p Full HD • HDCP compliant • 12-bit Deep Color • 3DTV pass-through • Lip Sync pass-through • Supported audio formats: up to 5.1 channels of Dolby® Digital, Dolby® Pro Logic, Dolby® Pro Logic II, and LPCM • 7 channels of pre-amp level analog audio outputs • Subwoofer pre-amp level output • 7 channels of amplified analog audio output up to 50 Watts RMS per channel • Two sets of front left and right amplified and pre-amp level outputs for use in bi-amplified systems • 5-way Binding Post speaker terminals • Test tone for speaker system set-up • LCD status display • Front panel buttons for power, volume, mute, source, and menu navigation • Hand-held remote control • IR control via front panel sensor and rear panel IR Extender input • Serial (RS-232) control for automation •...
  • Page 8 INTRODUCTION Front Panel...
  • Page 9 INTRODUCTION Front Panel Descriptions This IR receiver will accept commands from the included IR Remote Control Unit. Mute ► This button will cycles between Mute-On and Mute-Off modes. When the Mute-On mode is enabled, all audio output will be ceased. While in the Menu System this button will cycle through available options in the right direction when a feature has been selected for adjustment. Input ◄ This button cycles through all video and audio inputs. For each video input, audio may be selected from the embedded HDMI audio, or the coax, optical, or L/R analog audio inputs. Volume ▲ This button is used to increase the volume level of the audio outputs when not in the Menu System. While in the Menu System this button will cycle up through the current level’s options. Volume ▼ This button is used to decrease the volume level of the audio outputs when not in the Menu System. While in the Menu System this button will cycle down through the current level’s options. Main LCD Display This display will show pertinent status information and will be used to make adjustments to features in the Menu System. Menu This button will activate the Menu System which is where all adjustment and settings will be made. Mode / OK This button will change the audio processing mode. This button serves as a confirmation button when using the Menu System. Power Indicator This LED will indicate the current power state. When the LED is red, the unit is in standby mode. When the LED is green, the unit is on. 10 Power Press this button to power ON the Switcher or place it in Standby mode. 11 Exit This button is used to exit the current menu level and return to the previous/parent level. This button will exit the entire Menu System when on the top most level.
  • Page 10 INTRODUCTION Back Panel...
  • Page 11 INTRODUCTION Back Panel Descriptions Bi-Amp FR This pair of connectors is used to bi-amp the Front Right speaker. These speaker binding posts will accept spade lug, banana plug, dual banana plug, bare wire, and pin style connections. Used to connect the Front Right speaker. These speaker binding posts will accept spade lug, banana plug, dual banana plug, bare wire, and pin style connections. Bi-Amp FL This pair of connectors is used to bi-amp the Front Left speakers. These speaker binding posts will accept spade lug, banana plug, dual banana plug, bare wire, and pin style connections. Used to connect the Front Left speaker. These speaker binding posts will accept spade lug, banana plug, dual banana plug, bare wire, and pin style connections. Used to connect the Surround Right speaker. These speaker binding posts will accept spade lug, banana plug, dual banana plug, bare wire, and pin style connections. Used to connect the Surround Left speaker. These speaker binding posts will accept spade lug, banana plug, dual banana plug, bare wire, and pin style connections. Used to connect the Center speaker. These speaker binding posts will accept spade lug, banana plug, dual banana plug, bare wire, and pin style connections. Front Bi-Amp (Line Out) Use RCA-type cable to connect these outputs to the Front Left and Front Right input connectors on a separate amplifier. This pair of outputs is used for bi-amping the Front Left and Front Right speakers. Surround (Line Out) Use RCA-type cable to connect these outputs to the Surround input connectors on a separate amplifier. 10 Sub (Line Out) Use RCA-type cable to connect these outputs to the Subwoofer input connectors on a separate amplifier. 11 Front (Line Out) Use RCA-type cable to connect these outputs to the Front input connectors on a separate amplifier. 12 Line In Connect a pair of L/R RCA-type cables between these connectors and an analog audio source.
  • Page 12 INTRODUCTION 13 Optical In Connect an optical cable between this TOSLINK connector and the TOSLINK connector on a digital audio source. 14 Coax In Connect a coax audio cable between this S/PDIF connector and the S/PDIF connector of a digital audio source. 15 RS-232 This port is used to control the unit using serial communications. See page ## for more information. 16 HD Out Connect an HDMI cable between this connector and a display or A/V receiver. 17 IR Ext Connect an IR Extender (Gefen part no. EXT-RMT-IREXT) to this port to extend the range of the IR remote control unit. 18 HD In (1 - 4) Use HDMI cables to connect up to four Hi-Def sources to these inputs. 19 Trigger Out Provides 11.5 V DC when the Switch is powered ON. This trigger can be used to control an external power amplifier, lights, curtains, etc. 20 Trigger In Used to externally power the unit ON or OFF. This trigger will power ON the Switcher when a 3 V - 12 V DC voltage is applied. If the existing voltage is removed, then the Switcher is placed in Standby Mode (consumes less than < 1 W). 21 24V DC Connect the included 24 V DC power supply to this power receptacle. Only use the power supply that is included with this product.
  • Page 13 INTRODUCTION GTV-AUDDEC-NIR IR Remote Control Unit Mute This button cycle between mute on and mute off modes. When mute is applied there will not be any audio output. Mode This button functions the same as the Mode button on the front panel. Enter Confirms the current selection setting. ◄ (Cursor Left) This button will navigate left when using the Menu System. Exit This button functions the same as the Exit button on the front panel. ▼ (Cursor Down / Decrease Volume) This button will navigate down through options when using the Menu System and will increase the volume when not in the Menu System. L/R Press this button to select the analog L/R audio input source. The current video source will not change.
  • Page 14 INTRODUCTION Coax Press this button to select the S/PDIF audio input source. The current video source will not change. Optical Press this button to select the S/PDIF audio input source. The current video source will not change. 10 HDMI 1234 Press this button cycle between each of the HDMI input sources. The audio output will follow the HDMI source. 11 Info / Test Tone This button will display a series of information messages on the LCD screen when pressed. When adjusting the Speaker Level, this button will activate a test tone that is useful for adjusting the volume level of each speaker. 12 Enhance This button will cycle through audio enhancement presets. See page 32 for details on the available presets. 13 ► (Cursor Right) This button will navigate right when using the Menu System. 14 Menu This button will activate the Menu System which is where all adjustment and settings will be made. 15 ▲ (Cursor Up / Increase Volume) This button is used to increase the volume level of the audio outputs when not in the Menu System. While in the Menu System this button will cycle up through the current level options. 16 Power This button will toggle between the ON and STANDBY power states. An LED status indicator will signify the current power state. A RED LED will be active when the unit is in Standby power state. A GREEN LED will be active when the unit is in the ON power state. 17 Activity Indicator This LED will be activated momentarily each time a button is pressed. NOTE: An Activity Indicator that flashes quickly while holding down any one of the 16 buttons indicates a low battery. Replace the IR Remote Control battery as soon as possible.
  • Page 15 INTRODUCTION Installing the Battery Remove the battery cover on the back of the IR Remote Control Unit. Insert the included battery into the open battery slot. The positive (+) side of the battery should be facing up. Replace the battery cover. The Remote Control unit ships with two batteries. One battery is required for operation and the other battery is a spare. Battery Slot (shown with battery) WARNING: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
  • Page 16 INTRODUCTION How to Resolve IR Code Conflicts In the event that IR commands from other remote controls interfere with the supplied IR Remote Control unit, changing the IR Remote Control’s IR channel will fix the problem. The IR Remote Control unit has a bank of DIP switches used for setting the IR channel. The DIP switch bank is located underneath the battery cover. Left: Picture of the opened rear battery compartment of the IR remote showing the exposed DIP Switch bank between the battery chambers. IR Channel 0 (default) IR Channel 1 IR Channel 2 IR Channel 3 Corresponding DIP Switch Settings for each IR Channel It is important that the IR channel on the Remote Control unit, matches the IR channel set on the 4x1 AV Processor with Amp. For example, if both DIP switches on the IR Remote Control unit are set to IR channel 0 (both DIP switches down), then the 4x1 AV Processor with Amp must also be set to IR channel 0. See page 38 on how to change the IR channel on the 4x1 AV Processor with Amp.
  • Page 17: Installation

    Analog Audio Source HD Source Low Pass 4x1 AV Processor w/Amp Passive Crossover HD Display High Pass Passive Crossover R Mid-woofer Powered Subwoofer Low Pass GTV-HT-AUDPROCN Passive Crossover Using built-in amplification L Mid-woofer Using external power amplifier ATTENTION: This product should always be connected to a grounded electrical socket.
  • Page 18: Operating The 4X1 Av Processor With Amp

    OPERATING THE 4X1 AV PROCESSOR WITH AMP Status Screen The Status Screen displays information regarding the current settings of the Switcher. The Status Screen is also used in conjunction with navigating the built-in Menu System. After powering on the Switcher, the Standby Screen will be displayed. The Standby Screen indicates the currently selected A/V input, the current volume setting, the audio input format, and the audio processing mode: A/V Input Audio Gain Displays the currently selected Displays the audio Audio and Video inputs gain (volume) H1-HD -10db None Direct Input Format Audio Mode Displays the Displays the current audio audio input format processing mode Standby Mode and Powering the Switcher Once the power supply is connected and the AC power cord is connected to an available electrical outlet, the Power Indicator will glow bright red. When the Power Indicator is red, the Switcher is Standby Mode.
  • Page 19 OPERATING THE 4X1 AV PROCESSOR WITH AMP Selecting the Input Source Press the Input ◄ button to cycle through each input source. The table below lists which inputs are active for each selection. A/V Input Displays the currently selected A/V input H1-HD -10db None Direct This Switcher has four HDMI inputs (1 - 4) and three options for audio (coax, optical, and analog stereo). The following table lists the available video and audio inputs. Display Video Audio Display Video Audio H1_HD HDMI In 1 HDMI H3_HD HDMI In 3 HDMI H1_CX Coax H3_CX Coax H1_OT Optical H3_OT...
  • Page 20 OPERATING THE 4X1 AV PROCESSOR WITH AMP Adjusting the Volume Use the Volume ▲ and Volume ▼ buttons to increase or decrease the audio output gain. The ▲ or ▼ buttons on the IR Remote Control can also be used to control the audio output gain. Audio gain can be reduced to a minimum of -60 dB and to a maximum of +10 dB. Each time these buttons are pressed, the volume is increased or decreased by 1 dB. TIP: To increase or decrease the audio gain at a faster rate, press and hold down either the Volume ▲ or Volume ▼ button until the desired volume is achieved. Increase Current Volume Volume H1-HD -10db None Direct Decrease Volume Muting the Audio Output Use the Mute button on the front panel or on the IR Remote Control to mute the audio output. The display will indicate if the audio is muted. To disable the mute function, press the Mute button again. The Volume ▲ and Volume ▼ buttons can also be used to disable muting. Mutes Indicates Audio Output Audio is muted H1-HD MUTE -10DB None Direct...
  • Page 21 OPERATING THE 4X1 AV PROCESSOR WITH AMP Changing the Audio Processing Mode Successively press the Mode / OK button on the front panel to cycle through the different audio processing modes. The Mode button on the IR Remote Control can also be used to cycle through the audio modes. H1-HD -10db None Direct Displays Press to change current audio audio mode mode See page 26 for a description of each of the available audio processing modes. Main Menu To access the Menu System, press the Menu button on the front panel. The front-panel display will indicate that the menu system is active. The current sub-menu will be displayed under “Main Menu”. Press to display Menu system MAIN MENU SPEAKER SIZE Current Press to Press to Sub-menu return to...
  • Page 22: Menu System

    MENU SYSTEM Using the Menu System The 4x1 AV Processor with Amp comes with a built-in menu system which provides control over additional audio features. The following examples demonstrate some of the more common features of the Switcher. Setting the Speaker Size Adjusting the speaker size determines how each speaker handles low frequency bands. All speakers except the front left and right channels have an option to disable the use of that channel. If the center, read surround, or subwoofer channels are not going to be used there speakers should be set to the OFF setting. Source audio that uses these channels will be properly mixed to the other available speakers. A full summary of the Menu System can be found starting on page 69. Using the front-panel buttons Press the Menu button. The front-panel display will change to display the Speaker Size menu: MAIN MENU SPEAKER SIZE Press the Mode / OK button. The front-panel display will show the Front Left / Front R speaker size: SPEAKER SIZE FRONT L/R(LARGE) Press the Mute ► or Input ◄ button to change the speaker size. SPEAKER SIZE FRONT L/R(SMALL) Use the Volume ▲ or Volume ▼ buttons to change the size of the Center, Surround...
  • Page 23 MENU SYSTEM Using the IR Remote Control Press the MENU button. The front-panel display will change to display the Speaker Size menu: MAIN MENU SPEAKER SIZE Press the ENTER button. The front-panel display will show the Front Left / Front R speaker size: SPEAKER SIZE FRONT L/R(LARGE) Press the ◄ or ► buttons to change the speaker size. SPEAKER SIZE FRONT L/R(SMALL) Use the ▲ or ▼ buttons to change the size of the Center, Surround Left / Surround Right, and Subwoofer speakers. Press the EXIT button to save the changes and return to the Speaker Size menu. MAIN MENU SPEAKER SIZE...
  • Page 24: Speaker Level

    MENU SYSTEM Setting the Speaker Level Modifying the Speaker Level increases or decreases the audio output gain of a specific speaker. This feature is useful for equalizing the sound at the listening position. By default, each speaker’s output is set to 0 dB. The output can be adjusted by 1 dB increments between -10 dB and +10 dB. Using the front-panel buttons From the Standby Screen, press the Menu button. Use the Volume ▲ or Volume ▼ buttons to navigate to the Speaker Level menu: MAIN MENU SPEAKER LEVEL Press the Mode / OK button. The front-panel display will show the Front Left speaker level: SPEAKER LEVEL FRONT L (+00db) Press the Mute ► or Input ◄ button to change the output gain of the Front Left speaker. SPEAKER LEVEL FRONT L (+02db) Use the Volume ▲ or Volume ▼ buttons to cycle through the Center, Front Right, Surround Right, Surround Left, and Subwoofer and adjust the output gain of each speaker as necessary.
  • Page 25 MENU SYSTEM Using the IR Remote Control When using the IR Remote Control, the INFO | TEST TONE button can be used to produce a White Noise test tone in order to adjust the output level. The test tone can also be enabled / disabled via RS-232 (see page 65). Press the MENU button. The front-panel display will change to display the Speaker Level menu: MAIN MENU SPEAKER LEVEL Press the ENTER button. The front-panel display will show the Front Left speaker level: SPEAKER LEVEL FRONT L (+00db) Press the INFO | TEST TONE button on the IR Remote Control to enable the White Noise test tone. Press the ◄ or ► buttons to adjust the output gain of the Front Left speaker. SPEAKER LEVEL FRONT L (+02db) Once the desired output level has been set, press the INFO | TEST TONE button on the IR Remote Control to enable the test tone.
  • Page 26: Speaker Distance

    MENU SYSTEM Setting the Speaker Distance Changing the speaker distance is necessary for providing the proper audio delay when using the various audio processing modes. The distance for each speaker can be set in 1.5 foot (0.5 meter) increments within a range of 0 feet - 33 feet (10 meters). Speaker distance can be viewed in feet or meters. See page 34 for information on changing the preferred unit of measure on the Switcher. Using the front-panel buttons From the Standby Screen, press the Menu button. Use the Volume ▲ or Volume ▼ buttons to navigate to the Speaker Distance menu: MAIN MENU SPEAKER DISTANCE Press the Mode / OK button. The front-panel display will show the current distance for the Front Left speaker: SPEAKER DISTANCE FRONT L (03.0m ) Press the Mute ► or Input ◄ button to change the distance of the Front Left speaker. SPEAKER DISTANCE FRONT L (04.5m ) Use the Volume ▲ or Volume ▼ buttons to cycle through the Center, Front Right, Surround Right, Surround Left, and Subwoofer and adjust the speaker distance as necessary.
  • Page 27 MENU SYSTEM Using the IR Remote Control From the Standby Screen, press the MENU button. Use the ▲ or ▼ buttons to navi- gate to the Speaker Distance menu: MAIN MENU SPEAKER DISTANCE Press the ENTER button. The front-panel display will show the current distance for the Front Left speaker: SPEAKER DISTANCE FRONT L (03.0m ) Press the ◄ or ► buttons to change the distance of the Front Left speaker. SPEAKER DISTANCE FRONT L (04.5m ) Use the ▲ or ▼ buttons to cycle through the Center, Front Right, Surround Right, Sur- round Left, and Subwoofer and adjust the speaker distance as necessary. Press the EXIT button to save the changes and return to the Speaker Level menu. MAIN MENU SPEAKER DISTANCE...
  • Page 28 MENU SYSTEM Adjusting the Tone Control The Tone Control menu allows the adjustment of the treble and bass on the output signal. Treble and bass can be increased or decreased in 1 dB intervals, within a range of -12 dB to +12 dB. Using the front-panel buttons From the Standby Screen, press the Menu button. Use the Volume ▲ or Volume ▼ buttons to navigate to the Tone Control menu: MAIN MENU TONE CONTROL Press the Mode / OK button. The front-panel display will show the current bass setting. TONE CONTROL BASS (+01db) Press the Mute ► or Input ◄ button to change the bass setting. TONE CONTROL BASS (-02DB) Use the Volume ▲ or Volume ▼ buttons to navigate to the Treble setting and adjust the level as necessary. Press the Exit button to save the changes and return to the Tone Control menu.
  • Page 29 MENU SYSTEM Using the IR Remote Control From the Standby Screen, press the MENU button. Use the ▲ or ▼ buttons to navi- gate to the Tone Control menu: MAIN MENU TONE CONTROL Press the ENTER button. The front-panel display will show the current bass setting. TONE CONTROL BASS (+01db) Press the ◄ or ► button to change the bass setting. TONE CONTROL BASS (-02DB) Use the ▲ or ▼ buttons to navigate to the Treble setting and adjust the level as necessary. Press the EXIT button to save the changes and return to the Tone Control menu. MAIN MENU TONE CONTROL...
  • Page 30 MENU SYSTEM Saving Audio Processing Favorites The 4x1 AV Processor with Amp, allows any of five audio processing modes to be associated with a selected input. For example, you may want to associate the Multichannel Stereo audio processing mode with the optical (TOSLINK) input. On the other hand, you may want to set the Dolby Pro Logic II (PLII) audio processing mode when using the analog L/R inputs, in order to create discrete multichannel audio when using a surround system. These two examples will be illustrated. Available Modes Mode Description Audio playback without any processing (default setting). The input signal is the same as the output signal. DIRECT Multichannel audio is down-mixed to two-channel audio and routed to the Front Left / Front Right speakers. STEREO Mixes the SL and FL channels to the Front Left Speaker; Mixes the SR and FR channels to the Front Right Speaker. If the Center channel is present, then the Front Left, Front Right, and Center channel will be used to produce a stereo image. If the MCH STER Center channel is not present, then only the Front Left and Front Right speakers will produce the stereo image. If the Center channel speaker is present (or enabled), the audio is played only through the Center channel (the Front Left and Front Right speakers will be muted). If the Center channel speaker is not present (or disabled), Front Left and Front Right signals will MONO be combined and played out of the Front Left and Front Right speaker. Transforms two-channel stereo into high-quality 5.1-channel surround sound. PLII NOTE: PLII (Dolby Pro Logic II) Mode processes the stereo signal source into five separate full frequency channels.
  • Page 31 MENU SYSTEM Using the front-panel buttons Example 1: Assigning the optical (TOSLINK) input with the Multichannel Stereo audio processing mode: From the Standby Screen, press the Menu button. Use the Volume ▲ or Volume ▼ buttons to navigate to the Audio Setup menu: MAIN MENU AUDIO SETUP Press the Mode / OK button. The front-panel display will display the coaxial option: AUDIO SETUP COAXIAL FAV PROC Use the Volume ▼ button to navigate to the optical option: AUDIO SETUP OPTICAL FAV PROC Press the Mute ► or Input ◄ button to access the current setting for the optical (TOSLINK) input. In the illustration below, the optical input is set to use the Direct audio...
  • Page 32 MENU SYSTEM Example 2: Assigning the analog L/R inputs with the Dolby Pro Logic II audio processing mode: Starting from Step 5, above, use the Volume ▼ button to navigate to the analog L/R option: AUDIO SETUP AUD LR FAV PROC Press the Mute ► or Input ◄ button to access the current setting for the analog L/R input. In the illustration below, the analog L/R input is set to use the Stereo audio processing mode: AUD LR FAV PROC AUD LR( STEREO ) Press the Mute ► or Input ◄ button to change the current (favorite) setting from Stereo to PLII (Dolby Pro Logic II): AUD LR...
  • Page 33 MENU SYSTEM Using the IR Remote Control Example 1: Assigning the optical (TOSLINK) input to use the Multichannel Stereo audio processing mode: From the Standby Screen, press the MENU button. Use the ▲ or ▼ button to navi- gate to the Audio Setup menu: MAIN MENU AUDIO SETUP Press the ENTER button. The front-panel display will display the coaxial option: AUDIO SETUP COAXIAL FAV PROC Use the ▼ button to navigate to the optical option: AUDIO SETUP OPTICAL FAV PROC Press the ► or ◄ button to access the current setting for the optical (TOSLINK) input. In the illustration below, the optical input is set to use the Direct audio processing mode, by default:...
  • Page 34: Audio Setup

    MENU SYSTEM Example 2: Assigning the analog L/R inputs to use the Dolby Pro Logic II audio processing mode: Starting from Step 5, on the previous page, use the ▼ button to navigate to the analog L/R option: AUDIO SETUP AUD LR FAV PROC Press the ► or ◄ button to access the current setting for the analog L/R input. In the illustration below, the analog L/R input is set to use the Stereo audio processing mode: AUD LR FAV PROC AUD LR( STEREO ) Press the ► or ◄ button to change the current (favorite) setting from Stereo to PLII (Dolby Pro Logic II): AUD LR FAV PROC AUD LR( PLII...
  • Page 35 MENU SYSTEM Dynamic Range Compression Dynamic Range Compression (DRC) applies compression to the output signal, preventing the signal from becoming too loud. This function only affects Dolby audio and not PCM. The default setting for Dynamic Range Compression is OFF. Using the front-panel buttons From the Standby screen, press the Menu button. Use the Volume ▲ or Volume ▼ buttons to navigate to the Audio Setup menu. MAIN MENU AUDIO SETUP Press the Mode / OK button. Use the Volume ▲ or Volume ▼ buttons to select the DRC option: AUDIO SETUP Press the ◄ or ► button to change to enable DRC. AUDIO SETUP Press the Exit button to save the changes and return to the Audio Setup menu. MAIN MENU AUDIO SETUP...
  • Page 36 MENU SYSTEM Using the IR Remote Control From the Standby screen, press the MENU button. Use the ▲ or ▼ buttons to navigate to the Audio Setup menu. MAIN MENU AUDIO SETUP Press the ENTER button. Use the ▲ or ▼ buttons to select the DRC option: AUDIO SETUP Press the ◄ or ► button to change to enable DRC. AUDIO SETUP Press the EXIT button to save the changes and return to the Audio Setup menu.
  • Page 37 MENU SYSTEM Audio Enhancement Modes The 4x1 AV Processor with Amp provides four distinct audio enhancement modes. Each of these modes provide a different audio listening experience. Available Modes Mode Description Increases the volume of quiet passages, while decreasing the volume of loud passages. Similar to DRC but works with Night all audio signals. Detects speech audio patterns and separates them from the background sounds, making them more intelligible. VOICE Real-time detection of the source audio gain, providing constant volume level between changing VOLUME channels and commercial advertisements. Disables audio enhancement mode. Using the front-panel buttons From the Standby screen, press the Menu button. Use the Volume ▲ or Volume ▼ buttons to navigate to the Audio Setup menu. MAIN MENU AUDIO SETUP Press the Mode / OK button. Use the Volume ▲ or Volume ▼ buttons to select the Enhancement option: AUDIO SETUP enha.
  • Page 38 MENU SYSTEM Press the ◄ or ► button to change to change the audio enhancement mode. In the illustration below, the audio enhancement mode has been set to Night mode: AUDIO SETUP enha. ( NIGHT+) Press the Exit button to save the changes and return to the Audio Setup menu. MAIN MENU AUDIO SETUP Using the IR Remote Control From the Standby screen, press the MENU button. Use the ▲ or ▼ buttons to navigate to the Audio Setup menu. MAIN MENU AUDIO SETUP Press the ENTER button. Use the ▲ or ▼ buttons to select the Enhancement option: AUDIO SETUP enha. Press the ◄ or ► button to change to change the audio enhancement mode. In the illustration below, the audio enhancement mode has been set to Night mode: AUDIO SETUP enha. ( NIGHT+) Press the EXIT button to save the changes and return to the Audio Setup menu.
  • Page 39 MENU SYSTEM Setting the Unit of Measurement When adjusting the speaker distance, either feet or meters can be specified. Using the front-panel buttons From the Standby Screen, press the Menu button. Use the Volume ▲ or Volume ▼ buttons to navigate to the Misc Setup menu. MAIN MENU MISC SETUP Press the Mode / OK button. The front-panel display will show the current distance for the Front Left speaker: In the illustration below, the current unit of measure is set to meters. MISC MENU DIST.UNIT(METER) To change the unit of measure to feet, press the Mute ► or Input ◄ button to change the unit of measure to feet. MISC MENU DIST.UNIT( FEET) Press the Exit button to save the changes and return to the Misc Setup menu. MAIN MENU MISC SETUP...
  • Page 40 MENU SYSTEM Using the IR Remote Control From the Standby Screen, press the MENU button. Use the ▲ or ▼ buttons to navi- gate to the Misc Setup menu. MAIN MENU MISC SETUP Press the ENTER button. The front-panel display will show the current distance for the Front Left speaker: In the illustration below, the current unit of measure is set to meters. MISC MENU DIST.UNIT(METER) To change the unit of measure to feet, press the ◄ or ► button to change the unit of measure to feet. MISC MENU DIST.UNIT( FEET) Press the EXIT button to save the changes and return to the Misc Setup menu. MAIN MENU MISC SETUP...
  • Page 41 MENU SYSTEM Setting the EDID Mode The 4x1 AV Processor with Amp has three EDID modes (INT, EXT, and MIX). • INT Mode The internal (local) EDID is used instead of the EDID from the display device. EDID features newer than HDMI 1.3 are removed from the EDID data structure when the display is read. This provides a general EDID which is compatible with more displays. • EXT Mode The external (downstream) EDID is used. In this mode, both DDC and HPD are passed through and the Switcher uses the full video capabilities of the display. The HPD status will also be detected by the source device. • MIX Mode The display capabilities from the external EDID are combined with the audio capabilities of the internal EDID of the Switcher. Using the front-panel buttons To set the EDID mode, press the Menu button from the Standby screen. Use the Volume ▲ or Volume ▼ buttons to navigate to the Misc Setup menu. MAIN MENU MISC SETUP Press the Mode / OK button. Use the Volume ▲ or Volume ▼ buttons to select the EDID adjustment menu. In the illustration below, the internal (INT) EDID is being used.
  • Page 42 MENU SYSTEM Using the IR Remote Control To set the EDID mode, press the MENU button from the Standby screen. Use the ▲ or ▼ buttons to navigate to the Misc Setup menu. MAIN MENU MISC SETUP Press the ENTER button. Use the ▲ or ▼ button to select the EDID adjustment menu. In the illustration below, the internal (INT) EDID is being used. MISC SETUP EDID ADJ.( INT ) To change the EDID mode, press the ◄ or ► button to the desired EDID mode (below, the mixed-mode EDID has been selected). MISC SETUP EDID ADJ.( MIX ) Press the EXIT button to save the changes and return to the Misc Setup menu. MAIN MENU MISC SETUP...
  • Page 43 MENU SYSTEM Setting the IR Channel When controlling the 4x1 AV Processor with Amp using the IR Remote Control Unit, the IR channel on the Switcher must be the same as the IR channel set on the IR Remote Control Unit. See page 11 on changing the IR channel on the IR Remote Control Unit. Using the front-panel buttons From the Standby screen, press the Menu button. Use the Volume ▲ or Volume ▼ buttons to navigate to the Misc Setup menu. MAIN MENU MISC SETUP Press the Mode / OK button. Use the Volume ▲ or Volume ▼ buttons to select the IR channel menu. In the illus- tration below, the IR channel is set to 1. MISC SETUP IR CHANNEL ( 1 ) Press the Mute ► or Input ◄ buttons to change to the required IR channel. MISC SETUP IR CHANNEL ( 3 ) Press the Exit button to save the changes and return to the Misc Setup menu.
  • Page 44 MENU SYSTEM Using the IR Remote Control From the Standby screen, press the MENU button. Use the ▲ or ▼ button to navigate to the Misc Setup menu. MAIN MENU MISC SETUP Press the Mode / OK button. Use the ▲ or ▼ button to select the IR channel menu. In the illustration below, the IR channel for the Switcher is set to 1. MISC SETUP IR CHANNEL ( 1 ) Press the ◄ or ► button to change to the required IR channel. MISC SETUP IR CHANNEL ( 3 ) Press the Exit button to save the changes and return to the Misc Setup menu. MAIN MENU MISC SETUP...
  • Page 45: Misc Setup

    MENU SYSTEM Resetting the Switcher to Factory Settings If the Switcher needs to be reset for any reason or if you need to set the unit to factory (default) settings, follow the instructions below. Using the front-panel buttons From the Standby screen, press the Menu button. Use the Volume ▲ or Volume ▼ buttons to navigate to the Misc Setup menu. MAIN MENU MISC SETUP Press the Mode / OK button. Use the Volume ▲ or Volume ▼ buttons to select the Factory Defaults option. MISC SETUP Factory Default Press the Mode / OK button. The Switcher will prompt you to confirm the selection. OK TO F.DEFAULT MENU TO CANCEL Press the Mode / OK button to reset the Switcher to factory (default) settings.
  • Page 46 MENU SYSTEM Using the IR Remote Control From the Standby screen, press the MENU button. Use the ▲ or ▼ buttons to navigate to the Misc Setup menu. MAIN MENU MISC SETUP Press the ENTER button. Use the ▲ or ▼ buttons to select the Factory Defaults option. MISC SETUP Factory Default Press the ENTER button. The Switcher will prompt you to confirm the selection. OK TO F.DEFAULT MENU TO CANCEL Press the ENTER button to reset the Switcher to factory (default) settings. If the Switcher is reset, the Switcher will power OFF and then automatically power ON after a few moments. Press the MENU button to cancel the reset process and return to the Standby screen.
  • Page 47: Rs-232 Serial Control

    RS-232 SERIAL CONTROL RS-232 Interface DE-9 DA-15 RS-232 Controller 4x1 AV Processor TXD TXD DB-25 Only TXD, RXD, and GND are used. DC-37 RS232 Settings Baud rate ........................19200 Data bits ..........................8 Parity bits ........................None Stop bits ..........................1 DD-50 Flow Control ........................None IMPORTANT: When sending RS-232 commands, a carriage return must be included at the end of the command. A space must be included between the command and the parameter.
  • Page 48: Rs-232 Serial Commands

    RS-232 SERIAL COMMANDS Commands Command Description AUDIO Selects between S/PDIF, TOSLink, or Analog audio input BASS Increases or decreases the bass Sets the size of the Center speaker Sets the distance for the Center speaker Sets the distance for the Front Left speaker DFLT Sets the Switcher to factory (default) settings Sets the distance for the Front Right speaker Adjusts the Dynamic Range Control DSUB Sets the distance for the Subwoofer Sets the distance of the Left Surround speaker Sets the distance of the Right Surround speaker EDID Sets the EDID mode Sets the audio enhancement mode Sets the size of the Front Left / Front Right speakers HDMI Set the HDMI input HELP Lists these RS-232 commands INFO Returns hardware and firmware version INTYPE Returns the input audio format Sets the IR channel for the Switcher Sets the audio mode MUTE Enables / disables audio muting Powers the Switcher ON or OFF Sets the size of the Surround Left and Surround Right speakers Enables or disables auto status feedback STAT Enables / disables the subwoofer SUBV...
  • Page 49 RS-232 SERIAL COMMANDS AUDIO Command The AUDIO command assigns the external audio input. The AUDIO command does not have any effect on the video input. See page 54 for information on changing the video source. Syntax: AUDIO param1 Parameters: param1 Port [0 ... 3] Value Meaning HDMI S/PDIF TOSLink Analog RCA Returns: HDMI param1 param1 Meaning HDMI audio Coax (S/PDIF) audio Optical (TOSLINK) audio Analog L/R audio The value x represents the current HDMI input selection. For example, if the Switcher is using HDMI Input 2 with the optical (TOSLINK) audio input, the return value would be HDMI +22. Notes: HDMI is the return prefix for the AUDIO command. See the HDMI command on page 54 for further reference. Use ? for param1 to retrieve the current value.
  • Page 50 RS-232 SERIAL COMMANDS BASS Command The BASS command sets the bass level. Syntax: BASS param1 Parameters: param1 Level [-12 ...12] Returns: BASS value Value Meaning -12 ... +12 Bass level Notes: The + or - character can also be used, instead of specifying a value, in order to increase or decrease the bass level by 1 dB. Use ? for param1 to retrieve the current value. Example: bass + // increases the bass level by 1 dB bass - // decreases the bass level by 1 dB bass 5 // sets the bass level to +5 dB...
  • Page 51 RS-232 SERIAL COMMANDS CT Command The CT command sets the state of the Center speaker. Syntax: CT param1 Parameters: param1 State [0 ... 2] Value Meaning Small Center speaker Large Center speaker Returns: CT param1 param1 Meaning Small Center speaker Large Center speaker Center Speaker OFF Notes: Use ? for param1 to retrieve the current value.
  • Page 52 RS-232 SERIAL COMMANDS DC Command The DC command sets the distance of the Center speaker. Syntax: DC param1 Parameters: param1 Distance [0 ... 20] Returns: DC param1 Notes: Distance is measured in feet. Use ? for param1 to retrieve the current value. DFL Command The DFL command sets the distance of the Front Left speaker. Syntax: DFL param1 Parameters: param1 Distance [0 ... 20] Returns: DFL param1 Notes: Distance is measured in feet. Use ? for param1 to retrieve the current value.
  • Page 53 RS-232 SERIAL COMMANDS DFLT Command The DFLT command sets the unit to the default settings. Syntax: DFLT 1 Parameters: None Returns DFLT Notes: The value of 1 must be specified as a parameter. DFR Command The DFR command sets the distance for the Front Right speaker. Syntax: DFR param1 Parameters: param1 Distance [0 ... 20] Returns: DFR param1 Notes: Distance is measured in feet. Use ? for param1 to retrieve the current value.
  • Page 54 RS-232 SERIAL COMMANDS DRC Command The DRC command enables or disables Dynamic Range Control. Syntax: DRC param1 Parameters: param1 Value Value Meaning Turn DRC OFF Turn DRC On Returns: DRC param1 param1 Meaning DRC +00 DRC is OFF DRC +01 DRC is ON Notes: Use ? for param1 to retrieve the current value.
  • Page 55 RS-232 SERIAL COMMANDS DSB Command The DSB command sets the distance for the Subwoofer. Syntax: DSB param1 Parameters: param1 Distance [0 ... 20] Returns: DSB param1 Notes: Distance is measured in feet. Use ? for param1 to retrieve the current value. DSL Command The DSL command sets the distance for the Surround Left speaker. Syntax: DSL param1 Parameters: param1 Distance [0 ... 20] Returns: DSL param1 Notes: Distance is measured in feet. Use ? for param1 to retrieve the current value.
  • Page 56 RS-232 SERIAL COMMANDS DSR Command The DSR command sets the distance for the Surround Right speaker. Syntax: DSR param1 Parameters: param1 Distance [0 ... 20] Returns: DSR param1 Notes: Distance is measured in feet. Use ? for param1 to retrieve the current value.
  • Page 57 RS-232 SERIAL COMMANDS EDID Command The EDID command sets the EDID mode. Syntax: EDID param1 Parameters: param1 Mode [0 ... 2] Value Meaning EDID Mix Internal EDID External EDID Returns: EDID param1 param1 Meaning EDID +00 Mix Mode EDID +01 Internal EDID Mode EDID +02 External EDID Mode Notes: Internal EDID will use the built-in EDID of the Switcher. External EDID uses the down- stream EDID of the display. The EDID Mix Mode will use the full video capabilities of the display and combine the full audio capabilities of the Internal EDID of the Switcher. The Switcher will power-cycle after the command has been issued. Use ? for param1 to retrieve the current value.
  • Page 58 RS-232 COMMANDS ENH Command The ENH command sets the audio enhancement mode. Syntax: ENH param1 Parameters: param1 Mode [0 ... 20] Value Meaning Night Mode Voice Mode Volume Mode Audio Enhance OFF Returns: ENH Value Value Meaning ENH +00 Night Mode ENH +01 Voice Mode ENH +02 Volume Mode ENH +03 ENH Mode OFF Notes: Use ? for param1 to retrieve the current value.
  • Page 59 RS-232 COMMANDS FLR Command The FLR command sets the size for the Front Left / Front Right speakers. Syntax: FLR param1 Parameters: param1 Size [0 ... 1] Value Meaning Small Front Speakers Large Front Speakers Returns: FLR Value Value Meaning Small Front Speakers Large Front Speakers Notes: Use ? for param1 to retrieve the current value.
  • Page 60 RS-232 SERIAL COMMANDS HDMI Command The HDMI command sets the active HDMI input. The HDMI command does not have any effect on the audio input. See page 44 for information on changing the audio source. Syntax: HDMI param1 Parameters: param1 Input [1 ... 4] Input Meaning HDMI Input 1 HDMI Input 2 HDMI Input 3 HDMI Input 4 Returns: HDMI param1 param1 Meaning Set to HDMI Input 1 Set to HDMI Input 2 Set to HDMI Input 3 Set to HDMI Input 4 Notes: When executing the HDMI command, the audio will default to HDMI (embedded) audio. Use the AUDIO command (see page 44) to change the audio input. Use ? for param1 to retrieve the current value.
  • Page 61 RS-232 SERIAL COMMANDS HELP Command The HELP command lists the RS-232 command set. Syntax: HELP ? Parameters: None Notes: The ? character must be specified as a parameter. INFO Command The INFO command returns hardware and firmware version. Syntax: INFO ? Parameters: None Notes: The ? character must follow the command.
  • Page 62 RS-232 SERIAL COMMANDS INTYPE Command The INTYPE command returns the audio input format. Syntax: INTYPE ? Parameters: None Returns: [0 ... 4] Value Value Meaning None PCM 2.1 PCM 5.1 Dolby Digital 2.1 Dolby Digital 5.1 Notes: The ? character must follow the command.
  • Page 63 RS-232 SERIAL COMMANDS IR Command The IR command sets the IR channel for the Switcher. Syntax: IR param1 Parameters: param1 Channel [0 ... 3] Input Meaning IR Channel 1 IR Channel 2 IR Channel 3 IR Channel 4 Returns: IR Value Value Meaning IR Channel 1 IR Channel 2 IR Channel 3 IR Channel 4 Notes: Use ? for param1 to retrieve the current value.
  • Page 64 RS-232 SERIAL COMMANDS MD Command The MD command sets the audio mode. Syntax: MD param1 Parameters: param1 Mode [0 ... 4] Mode Meaning Pro Logic Surround Direct Input Downmix to Stereo L/R Multichannel Surround Downmix to Mono Returns: MD param1 Mode Meaning Pro Logic Surround Direct Input Downmix to Stereo L/R Multichannel Surround Downmix to Mono Notes: Use ? for param1 to retrieve the current value.
  • Page 65 RS-232 SERIAL COMMANDS MUTE Command The MUTE command sets the audio mode. Syntax: MUTE param1 Parameters: param1 Mode [0 ... 3] Mode Meaning Disable mute Volume set to minimum Mute toggle Returns: Using RS-232, the following values are returned Value Meaning MUTE +00 Mute is OFF MUTE +01 Mute is ON MUTE +00 Mute toggled OFF MUTE +01 Mute toggled ON Notes: Setting param1 to 2 will toggle the current audio muting state. Use ? for param1 to retrieve the current value.
  • Page 66 RS-232 SERIAL COMMANDS PWR Command The PWR command turns the Scaler ON or OFF. Syntax: PWR param1 Parameters: param1 Mode [0 ... 2] Mode Meaning Power save mode Power On Toggle power state Returns: Using RS-232, the following values are returned Value Meaning PWR +00 Power save mode ON PWR +01 Power save mode OFF PWR +00 Power toggled OFF PWR +01 Power toggled ON Notes: Setting param1 to 2 will automatically toggle the current power state. Use ? for param1 to retrieve the current value.
  • Page 67 RS-232 SERIAL COMMANDS SLR Command The SLR command sets the size of the Surround Left / Surround Right speakers. Syntax: SLR param1 Parameters: param1 Size [0 ... 2] Size Meaning Small Surround speakers Large Surround speakers Disable Surround speakers Returns: SLR value Value Meaning Small Surround speakers Large Surround speakers Disable Surround speakers Notes: Use ? for param1 to retrieve the current value.
  • Page 68 RS-232 SERIAL COMMANDS STAT Command The STAT command enables or disables auto status feedback. Syntax: STAT param1 Parameters: param1 Mode [0 ... 1] Mode Meaning Auto Status Off Auto Status On Returns: STAT value Value Meaning Auto Status Off Auto Status On Notes: Use ? for param1 to retrieve the current value.
  • Page 69 RS-232 SERIAL COMMANDS SUB Command The SUB command enables or disables the subwoofer. Syntax: SUB param1 Parameters: param1 Mode [0 ... 1] Mode Meaning Subwoofer Off Subwoofer On Returns: SUB value Value Meaning Auto Status Off Auto Status On Notes: Use ? for param1 to retrieve the current value.
  • Page 70 RS-232 SERIAL COMMANDS SUBV Command The SUBV command sets the volume level of the Subwoofer. Syntax: PWR param1 Parameters: param1 Range [-12 ... 12] Returns: SUBV value Value Meaning -12 ... +12 Subwoofer volume Notes: The + or - character can also be used, instead of specifying a value, in order to increase or decrease the subwoofer level by 1 dB intervals. Use ? for param1 to retrieve the current value.
  • Page 71 RS-232 SERIAL COMMANDS TEST Command The TEST command plays a test tone to specified speaker zone Syntax: TEST param1 Parameters: param1 Zone [0 ... 6] Zone Meaning Test tone to Front Left Test tone to Center Test tone to Front Right Test tone to Surround Right Test tone to Surround Left Test tone to Subwoofer Turn off current test tone Returns: TEST value Value Meaning Test tone to Front Left Test tone to Center Test tone to Front Right Test tone to Surround Right Test tone to Surround Left Test tone to Subwoofer Turn off current test tone Notes: The command test 6 must be invoked to halt the current test tone. The test tone can only be sent to one zone at a time (multiple zones cannot play test tones).
  • Page 72 RS-232 SERIAL COMMANDS TREB Command The TREB command sets the treble level. Syntax: TREB param1 Parameters: param1 Range [-12 ... 12] Returns: TREB value Value Meaning -12 ... +12 Treble setting Notes: The + or - character can also be used, instead of specifying a value, in order to increase or decrease the treble level by 1 dB intervals. Use ? for param1 to retrieve the current value.
  • Page 73 RS-232 SERIAL COMMANDS TVTYPE Command The TVTYPE command sets the video broadcast format. Syntax: TVTYPE param1 Parameters: param1 Format [0 ... 1] Format Meaning NTSC format PAL format Returns: TVTYPE value Value Meaning NTSC format PAL format Notes: Use ? for param1 to retrieve the current value.
  • Page 74 RS-232 SERIAL COMMANDS VOL Command The VOL command sets the overall output volume level. Syntax: VOL param1 Parameters: param1 Range [-60 ... 12] Returns: VOL value Value Meaning -60 ... +12 Volume level Notes: The + or - character can also be used, instead of specifying a value, in order to increase or decrease the volume level by 1 dB intervals. Use ? for param1 to retrieve the current value.
  • Page 75: Menu System Summary

    MENU SYSTEM SUMMARY Main Menu H1 HD -01db None direct Mode / OK ▲ MAIN MENU SPEAKER LEVEL ▲ Exit ▲ MAIN MENU SPEAKER DISTANCE ▲ Exit ▲ MAIN MENU TONE CONTROL ▲ Exit ▲ MAIN MENU AUDIO SETUP ▲ Exit ▲ MAIN MENU MISC SETUP ▲...
  • Page 76: Main Menu Exit

    MENU SYSTEM SUMMARY Exit ▲ MAIN MENU EXIT Exit ▲...
  • Page 77: Speaker Size

    MENU SYSTEM SUMMARY Speaker Size Menu MAIN MENU SPEAKER SIZE Mode / OK ▲ SPEAKER SIZE FRONT L/R(SMALL) ▲ Exit ▲ SPEAKER SIZE CENTER (SMALL) ▲ Exit ▲ SPEAKER SIZE SURR L/R (SMALL) ▲ Exit ▲ SPEAKER SIZE (SMALL) ▲ Exit ▲ SPEAKER SIZE EXIT Exit...
  • Page 78: Speaker Level

    MENU SYSTEM SUMMARY Speaker Level Menu MAIN MENU SPEAKER LEVEL Mode / OK ▲ SPEAKER LEVEL FRONT L (+00db) ▲ Exit ▲ SPEAKER LEVEL CENTER (+00db) ▲ Exit ▲ SPEAKER LEVEL Front R (+00db) ▲ Exit ▲ SPEAKER LEVEL SURR R (+00db) ▲...
  • Page 79 MENU SYSTEM SUMMARY Exit ▲ SPEAKER LEVEL (+10db) ▲ Exit ▲ SPEAKER LEVEL EXIT Exit ▲...
  • Page 80: Speaker Distance

    MENU SYSTEM SUMMARY Speaker Distance Menu MAIN MENU SPEAKER DISTANCE Mode / OK ▲ SPEAKER DISTANCE FRONT L (03.0m) ▲ Exit ▲ SPEAKER DISTANCE CENTER (02.0M) ▲ Exit ▲ SPEAKER DISTANCE Front R (03.0m) ▲ Exit ▲ SPEAKER DISTANCE SURR R (02.0m) ▲...
  • Page 81 MENU SYSTEM SUMMARY Exit ▲ SPEAKER DISTANCE (03.0m) ▲ Exit ▲ SPEAKER DISTANCE EXIT Exit ▲...
  • Page 82 MENU SYSTEM SUMMARY Tone Control Menu MAIN MENU TONE CONTROL Mode / OK ▲ TONE CONTROL BASS (+05db) ▲ Exit ▲ TONE CONTROL TREBLE (+00db) ▲ Exit ▲ TONE CONTROL EXIT Exit ▲...
  • Page 83 MENU SYSTEM SUMMARY Audio Setup Menu MAIN MENU AUDIO SETUP Mode / OK ▲ AUDIO SETUP COAXIAL FAV PROC ▲ Exit ▲ AUDIO SETUP OPTICAL FAV PROC ▲ Exit ▲ AUDIO SETUP AUD LR FAV PROC ▲ Exit ▲ AUDIO SETUP HDMI 1 FAV PROC ▲...
  • Page 84 MENU SYSTEM SUMMARY Exit ▲ AUDIO SETUP HDMI 3 FAV PROC ▲ Exit ▲ AUDIO SETUP HDMI 4 FAV PROC ▲ Exit ▲ AUDIO SETUP ( OFF ) ▲ Exit ▲ AUDIO SETUP ENHA. ( NIGHT+) ▲ Exit ▲ AUDIO SETUP EXIT Exit ▲...
  • Page 85 MENU SYSTEM SUMMARY Misc Setup Menu MAIN MENU MISC SETUP Mode / OK ▲ MISC SETUP DIST.UNIT(METER) ▲ Exit ▲ MISC SETUP EDID ADJ.(INT) ▲ Exit ▲ MISC SETUP TV SYSTEM( NTSC) ▲ Exit ▲ MISC SETUP IR ChANNEL ( 1 ) ▲...
  • Page 86 MENU SYSTEM SUMMARY Exit ▲ MISC SETUP EXIT Exit ▲...
  • Page 87: Specifications

    SPECIFICATIONS Maximum Pixel Clock ................225 MHz Power Amplifier Channels..................7 Power Output......................• 25W RMS per channel into 8 ohms • 50W RMS per channel into 4 ohms HDMI Inputs ..............(2) Type A 19-pin, female HDMI Outputs ............ (2) Type A 19-pin, female, locking IR Extender..............(1) 3.5mm mini-stereo jack Digital Audio Inputs ....................• (1) S/PDIF coaxial • (1) TOSLINK® optical Speaker Outputs..........(7) pairs of five-way binding posts Analog Audio Outputs..........(7) RCA type, pre-amp level Subwoofer Output............(1) RCA type, pre-amp level Subwoofer Crossover Frequency/Slope......100Hz, 12 dB per octave Signal-to-Noise Ratio................. > 90dBA THD....................< 0.1% at 1 kHz Frequency Response............ 20Hz - 20kHz ± 0.5dB Trigger Input..... (1) Phoenix-type terminal block; +3 to +12V DC, 100mA max. Trigger Output....(1) Phoenix-type terminal block; +12V DC, 100mA max. RS-232 Port................... (1) DB-9, female Power Supply............24V DC with locking connector Dimensions: (W x H x D)..... 14.75” x 2.5” x 6.9” (375mm x 64mm x 175 mm) Shipping Weight................10 lbs (4.5 kg)
  • Page 88: Warranty

    1. Proof of sale may be required in order to claim warranty. 2. Customers outside the US are responsible for shipping charges to and from Gefen. 3. Copper cables are limited to a 30 day warranty and cables must be in their original condition. The information in this manual has been carefully checked and is believed to be accurate. However, Gefen assumes no responsibility for any inaccuracies that may be contained in this manual. In no event will Gefen be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. The technical information contained herein regarding the features and specifications is subject to change without notice. For the latest warranty coverage information, refer to the Warranty and Return Policy under the Support section of the Gefen Web site at www.gefen.com. PRODUCT REGISTRATION Please register your product online by visiting the Register Product page under the Support section of the Gefen Web site.
  • Page 90 Rev A1 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com/gefentv support@gefentv.com This product uses UL listed power supplies.

Table of Contents