11b/g Wireless Outdoor Multi-Client Bridge/AP
After a few seconds the firmware will start to re-program the device and you will see
a countdown on the Success page.
Note: Do not un-plug the device during this process. Some firmware upgrades may
restore the configuration back to the factory default settings. Therefore you may need to
restore a configuration from a file. Refer to Administrator Settings for details.
3.2.3 System Reboot and Restore Settings to Default
Click on the System link under the System menu. This page allows you to reboot
the device using the current settings or restore all the settings to the factory defaults.
3.2.3.1 System Reboot
Click on the Reboot the Device button to reboot the device using its current settings.
Once the dialog box appears, click on the OK button to confirm the action.
Version 1.0
18