Table of Contents
Advertisement
OPERATING INSTRUCTIONS
Choosing the Correct Nozzle
This accessory was designed to be used with more than one pressure washer. Refer
to the chart below to determine the correct nozzle for your unit. Select the combina-
tion of water pressure (psi) and water flow (gpm) that most closely resembles the
rating of your pressure washer.
GPM
2.00
2.00
2.25
2.50
2.75
3.00
3.00
3.50
4.00
ASSEMBLY
1.
Place nozzle into the end of the high
pressure soap wand as shown.
Tighten with Allen wrench.
Nozzle
2.
Replace the current lance on your
pressure washer with the high
pressure soap wand.
or
D20443 Rev. 0 3/14/00
NOZZLE TO USE
PSI
1500-1800
1.3 mm Nozzle Blaze Orange
1900-2200
1.2 mm Nozzle Bright Yellow
2300-2500
1.2 mm Nozzle Bright Yellow
2200-2400
1.3 mm Nozzle Blaze Orange
2300-2600
1.3 mm Nozzle Blaze Orange
2000-2600
1.4 mm Nozzle Beige
2700-3000
1.3 mm Nozzle Blaze Orange
2500-3000
1.4 mm Nozzle Beige
3000-3500
1.4 mm Nozzle Beige
3.
Press one end of the clear soap
hose (supplied) onto the barb fitting
on the high pressure soap wand.
4.
Press the screen filter (found in
parts bag) onto the other end of the
wand
soap hose and place it into the
container of pressure washer
approved cleaning fluid.
Approved
Cleaning
Fluid
4
Barb Fitting
Advertisement
Table of Contents
