Broadcasting and Paired Modes 3
Broadcasting and Paired Modes
You need at least two E-MU PIPEline™ units to form a basic transmitter-
receiver group. With more units, you can configure more complex multiple
wireless groups as shown below.
Broadcasting
Paired
By setting the Mode DIP switches located at the back of the unit, you can
configure it as a transmitter or receiver, and also set it to be used in either
broadcasting or paired mode.
Broadcasting can be used with any number of paired E-MU PIPEline™
receivers. It is usually used in a "one transmitter-to-many receivers" group.
Paired means that one transmitter is linked solely to one dedicated
receiver.