E-Mu PIPEline User Manual page 11

8 Turn on the receiver
Step 3: Turn on the receiver
Press the Connect button at the back of the receiver.
For paired mode, the Link LED flashes as it searches for a transmitter to
pair with.
Step 4: Turn on the transmitter
Next, press the Connect button of the transmitter.
For Broadcasting Mode
When pairing is successful, the receiver should be able to hear audio from
the output device connected to the receiver.
If you are broadcasting to more than one receiver, repeat Steps 3 and 4.
For Paired Mode
The Link LED of the receiver flashes and then lights up green when pairing
with the transmitter is successful.
Repeat Steps 1 to 4 to pair another dedicated transmitter-receiver group.
This group must use a different RF channel.