E-Mu 1616 PCI Owner's Manual page 105

Specifications: 1212
GENERAL
Sample Rates
Bit Depth
Hardware DSP
Converters & OpAmps
WDM Drivers
ANALOG LINE INPUTS
Type
Level (software selectable)
Frequency Response
THD + N
SNR
Dynamic Range
Channel Crosstalk
Common-mode Rejection
Input Impedance
ANALOG LINE OUTPUTS
Type
Level (software selectable)
Frequency Response
THD + N
SNR
Dynamic Range
Stereo Crosstalk
Output Impedance
E-MU PCI Digital Audio Systems
m
System
44.1 kHz. 48 kHz, 88.2 kHz, 96 kHz, 176.4kHz, 192 kHz from
internal crystal. Externally supplied clock from S/PDIF , ADAT
(or word clock with optional Sync Card)
16 or 24-bits
100MIPs custom audio DSP .
PCI Bus-Mastering DMA subsystem reduces CPU usage.
Zero-latency direct hardware monitoring with effects
ADC - AK5394 (AKM)
DAC - CS4398 (Cirrus Logic)
OpAmp - NJM2068M (JRC)
8 channels — operational at 44.1kHz, 48kHz, 88.2kHz,
96kHz, 176.4kHz & 192kHz
Servo-balanced, DC-coupled, low-noise input circuitry
Professional: +4 dBu nominal, 20 dBu maximum (balanced)
Consumer: -10 dBV nominal, 6 dBV maximum (unbalanced)
+/- .05dB, 20 Hz - 20 kHz
-110 dB (.0003%) 1kHz at -1 dBFS
120 dB (A-weighted)
120 dB (A-weighted)
< -115 dB, (1 kHz signal at -1 dBFS)
> 40 dB at 60Hz
10K ohm
Balanced, low-noise, 2-pole low-pass differential filter
Professional: +4dBu nominal, 20dBu (balanced)
Consumer: -10dBV nominal, 6dBV maximum (unbalanced)
+0.0/-0.35 dB, 20 Hz - 20 kHz
-105 dB (.0006%) 1kHz signal at -1dBFS
120 dB (A-weighted)
120 dB (A-weighted)
< -120 dB, 1kHz
560 ohms
6 - Appendix
Technical Specifications
105