Related Manuals for Datatronics JuniBox JB7210 Series
Summary of Contents for Datatronics JuniBox JB7210 Series
- Page 1 Operation Manual JuniBox Automated Disc Duplicator Model #: JB7210 Series (Standalone) Serial Number: ______________________________ (The serial number is labeled on the rear panel of the device.)
-
Page 2: Preface
© 2008, Datatronics Technology Inc. All rights reserved. Notices: Reproduction, adaptation, or translation without prior written permission is prohibited. Trademarks: Datatronics, JuniBox, GetTray, BoxWriter, MiniCubis, and Pronto are the trademarks of Datatronics Technology Inc. All © 2008, Datatronics Technology, Inc. - Page 3 Technology Inc. makes no warranty of any kind with respect to this information. Datatronics Technology Inc. guarantees this device for a period of one year from the date of delivery, free from defects in material and workmanship. In case of malfunction or fault, Datatronics Technology Inc.
- Page 4 In no event will Datatronics Technology Inc. be liable for direct, indirect, special, incidental, tort, economic, contingent or consequential damages resulting from any defect in this product or its documentation, including, without, limitation, damages or costs relating to the loss of data, profits, business or goodwill, even if Datatronics Technology Inc.,...
-
Page 5: Table Of Contents
Verify a Stack of Discs ..............22 Appendix JuniBox Maintenance..............23 Choosing Reliable Blank Discs........... 23 Disc Separation................23 The Quality of the Master Disc Counts ........24 Writing Speed................24 Frequently Asked Questions © 2008, Datatronics Technology, Inc. -
Page 6: Specifications
Dimensions: 7-3/4" x 8-1/2" x 15-3/8"; 19.5 x 21.3 x 39 cm Weight: 2.7 kg; 6 lbs (varies upon configuration) Power: 100 to 240VAC; 50 or 60 Hz *Specifications are subject to change without notice. © 2008, Datatronics Technology, Inc. -
Page 7: Unpacking Your Junibox
Once you have removed all the parts included with your package, please check to see if any pieces are missing or damaged. If any part is missing or damaged, contact your local dealer immediately. © 2008, Datatronics Technology, Inc. - Page 8 One JuniBox JB7210 Automated Disc Duplicator One power cord One power adapter One spindle box (serves as the Finish Disc Bin) Three Extension Rods (attached to the underside of JuniBox's lid) One Alignment Pad Four Legs One operation manual © 2008, Datatronics Technology, Inc.
-
Page 9: Getting Familiar With Junibox
Lid (Blank Disc Storage) Open the lid to access the blank disc storage area. Control Panel Located on the top front of JuniBox, the control panel © 2008, Datatronics Technology, Inc. -
Page 10: Rear View
Kensington Security Slot Security lock anti-theft system. Control Panel There are operation buttons and LED indicators on JuniBox’s control panel as illustrated to the right. High-Speed Duplication Press to start the duplication © 2008, Datatronics Technology, Inc. -
Page 11: Led Indicators
Ready Mode High-Speed Duplication Safe-Speed Duplication High-Speed Duplication with Disc Verification Safe-Speed Duplication with Disc Verification Disc Verification in progress Erasing rewritable disc Error Encountered Function Key Enabled : Lit : Off : Flash : Running © 2008, Datatronics Technology, Inc. - Page 12 Operation Manual, JuniBox JB7210 Version 1.1F (This page is intentionally left blank.) © 2008, Datatronics Technology, Inc.
-
Page 13: Device Installation
Follow the steps below to complete JuniBox’s hardware installation: Place JuniBox on level surface so that it stands firmly on its legs. Place the spindle box that came with the unit in front of JuniBox. © 2008, Datatronics Technology, Inc. - Page 14 Finish Disc Slot. Use the power cord that came with the unit to connect JuniBox to a wall outlet with a reliable power supply. You have now successfully completed the installation of JuniBox device. © 2008, Datatronics Technology, Inc.
-
Page 15: Before Getting Started
JuniBox is designed to have Rejected Discs come out underneath the unit. Do not block the Reject Disc Slot. Periodically remove rejected discs so that there is room to accommodate more discs or raise JuniBox using the provided legs to © 2008, Datatronics Technology, Inc. -
Page 16: More Than 30 Discs In One Session
To remove the extension rods from the disc loader, turn the rods clockwise and pull them upward vertically. When not using the rods, return them to their original position on the lid’s underside. Automated Multiple-Master-Disc Duplication JuniBox not only performs one-to-multiple, but also multiple-to-multiple © 2008, Datatronics Technology, Inc. -
Page 17: Write Speed: Production Rate Vs. Duplication Quality
However, due to the limitation of industry standards, for audio disc verification it will only perform the reading check, and not the comparison process. © 2008, Datatronics Technology, Inc. -
Page 18: Handling Disc Write Failures
Although it is fine to leave the power cord plugged in, it is recommended that you unplug the cord for increased safety when JuniBox is not used for extended periods of time. © 2008, Datatronics Technology, Inc. - Page 19 Version 1.1F Operation Manual, JuniBox JB7210 (This page is intentionally left blank.) © 2008, Datatronics Technology, Inc.
-
Page 20: Operation Quick Guide
Do not use rewritable discs as master discs beca the data on the disc will be erased. Important: To verify you r written data, press the Function Key which will light up its LE © 2008, Datatronics Technology, Inc. -
Page 21: Duplication Simulation
Duplication simulation will not work with DVD+R, DVD+RW and DVD+R DL discs. When a DVD+ disc is detected it will be rejected. Erase a Stack of Rewritable Discs This operation erases a stack of rewritable discs for © 2008, Datatronics Technology, Inc. -
Page 22: Verify A Stack Of Discs
Follow the steps below to start the verification process: Load the master disc and the discs you would like to verify. Press the Function Key which will light up its LED. Press the Test/Abort button to start. © 2008, Datatronics Technology, Inc. -
Page 23: Appendix
Avoid these types of discs. JuniBox is equipped with a patent pending disc separator, which handles discs that adhere to each other better than traditional autoloaders. However, it is strongly recommended that you separate or loosen blank discs from each other before use. © 2008, Datatronics Technology, Inc. -
Page 24: The Quality Of The Master Disc Counts
Insufficient power supply may decrease output rate or increase failure rate. As a general rule, a lower writing speed will improve quality. When creating audio and video discs a lower writing speed is recommended to assure quality. © 2008, Datatronics Technology, Inc. -
Page 25: Frequently Asked Questions
How can I restart or reset JuniBox when it is not working properly? Turn the power switch to the Off position and back to the On position after waiting 30 seconds. If this does not solve the problem, please contact your dealer or authorized service center. © 2008, Datatronics Technology, Inc. - Page 26 Operation Manual, JuniBox JB7210 Version 1.1F Datatronics Technology, Inc. http://www.datatronics.com.tw Manual Ver.: 1.1F, October 2008 Part #: 711-7210-1000-1 © 2008, Datatronics Technology, Inc.