Datatronics Series Automatic Disc Duplicator User’s Guide v2.1 1. Introduction Thank you for purchasing DA-5500 series automatic disc duplicator. The DA-5500 series is a stand-alone unattended duplicator that requires no computer connection during operation. It consists of robotic mechanism that can automatically move discs from an input bin to the burner, then to the output bin after duplication is complete.
Datatronics Series Automatic Disc Duplicator User’s Guide v2.1 3.2 MULTI-COPY If you are to duplicate with blank discs, place the first master on the input bin, then the number of blank discs you wish to copy on top of it. Then place the second master on top, and follow that order with the rest of blank discs and masters.
Datatronics Series Automatic Disc Duplicator User’s Guide v2.1 3.7 OPTIONS Press [ENTER] and use↑↓to choose. SETTING a. Compare: Choose “Yes” to perform compare after each copy is done. Please reset the function every time you reboot the unit. b. Overburn: Choose “Yes” to burn master disc that contains more than 700MB data.
Datatronics Series Automatic Disc Duplicator User’s Guide v2.1 4.3 Setting up Please follow the procedures: A. Remove Input bin on top B. Remove the form. C. Insert the Reject bin. D. Insert the Input bin. E. Insert the Input bin.
Datatronics Series Automatic Disc Duplicator User’s Guide v2.1 4.4 Loading Discs Wear lint free gloves whenever you handle discs to avoid fingerprints that can affect duplication. Make sure the first 5 discs have to be leveled while inserted. You can add discs to the input bin while the system is running.
Page 8
Datatronics Series Automatic Disc Duplicator User’s Guide v2.1 Why is that the power switch does not work every time? This can be easily solved if you allow 5 seconds interval between turn on/off. Why is that the Robotics arm fails to pick up the discs?
Datatronics Series Automatic Disc Duplicator User’s Guide v2.1 6.2 LCD Error Code Definitions ERROR CODE 0 ----> Loader mechanism is not working smoothly. Reboot the unit please. ERROR CODE 1 ----> Moving robotic arm to output spindle is not working smoothly.