LG WT-H800 Service Manual page 41

Hide thumbs Also See for WT-H800:
Table of Contents

Advertisement

4-7. TROUBLE SHOOTING METHODS ACCORIDNG TO ERROR MESSAGE
For more detailed information for trouble shooting refer to page 42 to 51.
ERROR DECISION
ERROR
WATER
WATER LEVEL
SUPPLY
dose not rise to
the set level in 30
minutes.
DRAINAGE
Water is not
completely
drained in 12
minutes.
UNBALANCE
Laundry
unbalance during
spin.
DOOR
LID is opened in
the course of
OPEN
intermittent spin,
normal spin or
processing
reservation.
SIGNAL
continuously
ringing.
"DOOR OPEN "
lamps blinks.
BASIS
"NO INLE"
lamp blinks
CAUSE FOR ERROR
OCCURRENCE
Water faucet is closed?
Water supply is interrupted.
Inlet V/V is clogged with
dirts.
Connector has bad contact
to the inlet valve.
BLUE 6 pin connector has
bad contact to the P.W.B
ASM.
Is the drain hose located
properly?
Drain hose is folded or
clogged due to freeze or dirt.
Bad Drain Pump part or
BLUE (WHITE) 3 pin
connector to the P.W.B ASM
has bad connection.
Laundry in the INNER TUB
is filled unevenly.
Washer is tilted.
Lid is opened during
intermittent spin or normal
spin?
Lid is opened while
processing reservation?
Connector to the Lid S/W or
NATURAL 6pin connector to
the P.W.B ASM has bad
connection.
40
REMEDY
Open water faucet.
Wait until water supply is
resumed.
Clean or replace filter.
Correct the connector
contact.
Same as above.
Hung up drain hose at
0.9~1.2m high.
Unclose the foreign objects
within drain hose.
Replace Drain Motor or
correct the connector
contact.
Try to fill laundry uniformly
in the inner tub.
Adjust the leg.
Closed the lid.
Closed the lid.
Correct the connector
contact.
Check and replace Lead
Wire Asm.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wt-h950

Table of Contents