Table of Contents
Advertisement
Quick Links
User Instructions
Rev. 10/10
Gobo Projector LED
To optimize the performance of this product, please read these operating
instructions carefully to familiarize yourself with the basic operations of this
unit. These instructions contain important safety information regarding the
use and maintenance of this unit. Please keep this manual with the unit, for
future reference.
Unpacking:
Thank you for purchasing the Gobo Projector LED by American DJ®. Every
Gobo Projector LED has been thoroughly tested and has been shipped in
perfect operating condition. Carefully check the shipping carton for damage
that may have occurred during shipping. If the carton appears to be dam-
aged, carefully inspect your unit for any damage and be sure all equipment
necessary to operate the system has arrived intact. In the event damage has
been found or parts are missing, please contact our toll free customer support
number for further instructions. Please do not return the unit to your dealer
without first contacting customer support.
Customer Support:
American DJ® provides a toll free customer support line, to provide set up
help and to answer any question should you encounter problems during your
set up or initial operation. You may also visit us on the web at www.ameri-
candj.com for any comments or suggestions. For service related issue please
contact American DJ®. Service Hours are Monday through Friday 9:00 a.m.
to 5:00 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or fire, do not
expose this unit to rain or moisture.
Caution!
This may cause eye damage. Avoid looking directly into the
light source. Use sensible precaution.
Caution! There are no user serviceable parts inside this unit. Do not attempt
any repairs yourself, doing so will void your manufactures warranty. In the
unlikely event your unit may require service please contact your nearest
American DJ dealer.
PLEASE do not discard the shipping carton in the trash. Please recycle
when ever possible.
American DJ Supply
- www.americandj.com - Gobo Projector LED User Manual Page 2
©
®
Introduction
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for American DJ Gobo Projector LED
Summary of Contents for American DJ Gobo Projector LED
- Page 1 Please keep this manual with the unit, for future reference. Unpacking: Thank you for purchasing the Gobo Projector LED by American DJ®. Every Gobo Projector LED has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping.
- Page 2 Using the switch located at • Disconnect from main power before making any type of connection. the back of the unit, you can make the gobo remain static or make • Do not remove the cover under any conditions. There are no user the gobo rotate counter-clockwise.
- Page 3 Remove the bad fuse and replace with a new one. To replace gobo; The fuse holder has a built-in socket for a spare fuse be sure not to 1. Unscrew the two screws located at the top that hold the gobo confuse the spare fuse with active fuse. housing.
- Page 4 American DJ, Inc. concludes, after inspection, affects the reliability Duty Cycle: None of the product; if the product has been repaired or serviced by anyone other than the American DJ, Warranty: Three Year (1095 Days) Inc.
Need help?
Do you have a question about the Gobo Projector LED and is the answer not in the manual?
Questions and answers