Displaying Information (For Troubleshooting) - Eclipse CD3421 Owner's Manual

If you have a question:
Displaying information
The information listed in the chart below is displayed to
show the status of the CD player and CD changer. Refer to
the chart for the appropriate action.
Infomation Code Table
Infomation Contents
2 NO DISK LOADED IN
THE MAGAZINE
3
DISCS ARE DIRTY OR
DAMAGED
CD CHANGER FAILS
5
MECHANICALLY
6 WHEN THE CD CHANGER
INTERNAL TEMPERATURE
IS HIGH. TO PROTECT
PICKUP UNIT
7 AN INTERNAL POWER
SUPPLY FAILURE IS
OCCURRING WITH THE
AUTO CHANGER
56
(for troubleshooting)
When INFO flash on the
indicator . Nos.2-7 are displayed.
Explanation and remedial action to take.
There is no disc in the magazine or player.
Load adisc in the magazine.
Load a music disc.
The loaded disc is dirty or upside down.
Check it for proper orientation and verity it
is clean.
The CD changer is inoperative for some
reason.Go through the magazine removal
procedure.
If a magazine fails to eject, have your dealer
fix the problem.
The temperature in the CD changer is too
high for operation.Wait until it cools down.
Resume playing after the
temperature sensed and CD stopped
display disappears.If the CD still cannot
play , have your dealer repair it.
Tum the ACC off once before turning it on
once again to resumu the operation.
If the function still cannot be resctred,
ccntact your dealer.
High