AR Modular Wireless System
Installing the ARWS3 Subwoofer Receiver
1.
CONNECTING TO THE SUBWOOFER
Connect an RCA cable from the SUB LINE OUT of the ARWS3 Subwoofer
Receiver to the LFE or Line level input of your subwoofer. The ARWS3 does not
have a power amplifier and must be connected to a powered subwoofer to work
properly. Do not connect the RCA output directly to a low impedance speaker load
as this may cause damage to the system.
2.
CONNECTING POWER
Insert the DC 12V AC-DC Adaptor plug into the DC Jack on the rear of the ARWS3
Subwoofer. Plug the other end of the AC-DC Adaptor into a conveniently located
electrical wall outlet.
ADAPTOR (DC 12V)
ARWS3 SUBWOOFER RECEIVER
DC IN JACK
SUB LINE OUT
14
SUBWOOFER