Call Function - Witura WT-2003 User Manual

WT-2003 3G VIDEO DESKPHONE
2.3 Table Description
Icon
The network is WCDMA and
the signal strength, the
more signal masts, the
signal is better
Power capacity, the more
green bar, the more power.
There is a new unread
message
In the condition of agreeing
to receive PUSH information,
there are a multimedia
message has not been
received in the service box
The alarm clock is on
3.

CALL FUNCTION

3.1 Making Calls
When you can see the operator name, you can use this function (For example, CELCOM)
There are some making call ways as following:
The First Way: Pick up the handset and you can hear the dialing tone, and then

input the numbers, pressing [OK] key to send the calls. It will make the faster
connection of the call.
The Second Way: In the idle status, press [P.B/BACK] key to get into the

contacts menu and you can choose the needed record and then press[SEND] key
to dial out the number immediately.
The Third Way: In the idle status, press [SEND] key to get into outgoing calls

menu and you can choose the needed numbers and press [SEND] key to dial out
the number immediately.
WT-2003 – USER MANUAL – Rev1.0 – Technical Support:
Function
COPYRIGHT ©2011 WITURA TECHNOLOGY SDN BHD
Icon Function
The network is GSM and
the Signal strength, the
more signal masts, the
signal is better
When the green bar is
rolling, the phone has been
connected to external
power supply
The space for the short
message is full
Now you are using the
GPRS data service
technical@witura.com
5