Witura WT-2003 User Manual page 28

WT-2003 3G VIDEO DESKPHONE
Change phone code: When you turn on the [Phone lock] function, you should

input the password every time turning on the phone. If you want to change the
password or turn off phone code function, please choose [Change phone code] to
change phone code or set [Off].
Change PIN2: You can change PIN2 code. Press [MENU/SELECT] key to input the

old password and then input the new password.
Attention: When you turn on (turn off) this function and add (change, delete) FDN code,
you will use this PIN2 code.
10.6 Connection Settings
You can set connection parameters.
USB: You can choose PC sync, USB and Dial up.

Data account: The default account is China Unicom. You also can create a new

account and you also can do the operations: create, check, edit and delete for the
new data account.
10.7 Reset Settings
You can restore all parameters as factory default settings. You also can choose restore
some settings.
11. Tools
11.1 Alarm
In the idle state, press [MENU/SELECT] to get into the function main menu and choose
[Tools  Alarm]
There are three groups of alarms [Alarm 1], [Alarm 2], [Alarm3] and you can set
them separately.
 Edit: You can set the alarm time and you can set [Time], [Alarm alert], [Once],
[Everyday], [Alarm interval], and you can press / to choose them. Press
[MENU/SELECT] to save all settings.
 On: After you finish the settings, you can choose to turn on this alarm.
 Off: If you have turn on one alarm, you can choose to turn off this alarm.
WT-2003 – USER MANUAL – Rev1.0 – Technical Support:
COPYRIGHT ©2011 WITURA TECHNOLOGY SDN BHD
technical@witura.com
28