5-3-2 Read Projector IP
1. Turn on the unit, press "Menu" button to
get into OSD Mode.
- Use "Down" button to remove the light
mark to "RS232", then press "Enter"
button.
- Select "Network", press "Enter" button.
2. Use "Down" button to remove the light
mark to "Network", press "Enter" button.
3. Select "DHCP", press "Enter" button.
- Select "Off", press "Enter" button.
- The IP address will be shown on screen
(as blue square).
EX765/EW766/EX765W/EW766W
Confidential
5-6