Optoma EX330 Service Manual page 52

3. Programming
- Key in the serial number into the barcode
blank space.
- In "Write Source Select", make a check in
"Analog" and "Digital".
- Click "Program".
4. Change the cable to VGA
- Message box appears on the screen, then
click "OK".
5. Change the cable to HDMI
- Message box appears on the screen,plug
DVI Cable to connect to adapter then plug
in HDMI port. After finish above action, click
"OK."
6. When the EDID program is completed,
a message "OK" will appear on the screen.
EX330/EW330/EX330(1W)/EW330(1W) Confidential
6-4