Optoma EX330 Service Manual page 26

2-23 Re-write Lamp Hour
and Projection Hour
1. Get into service mode
- Press "Power->Left->Left->Up" to get
into service mode.
2. Re-write Lamp Hour
- Use "Up" or "Down" key to select "Exit". - Use "Up" or "Down" key to select "Exit". Use "Up" or "Down" key to select "Exit".
- Use "Left" or "Right" key to re-write the - Use "Left" or "Right" key to re-write the Use "Left" or "Right" key to re-write the
lamp hour.
Note: Left key = decrease lamp hour
Right key=increase lamp hour
3. Re-write Projection Hour
- Use "Up" or "Down" key to select "ADC/ - Use "Up" or "Down" key to select "ADC/ Use "Up" or "Down" key to select "ADC/
DEO Color".
- Press "Right" button 10 times,then - Press "Right" button 10 times,then Press "Right" button 10 times,then
use "Left" or "Right" key to re-write the
Projection Hour.
Note: Left key = decrease Projection Hour
Right key=increase Projection Hour
4. Use "Up" or "Down" key to select "Exit",
press "Enter" to exit service mode.
EX330/EW330/EX330(1W)/EW330(1W) Confidential 2-1