Disassemble Rod Module; Disassemble Focus Ring - Optoma ES526 Service Manual

2-14 Disassemble Rod
Module
1. Unscrew 2 screws (as green circle) to
take off the Rod Spring.
2. Unscrew 1 screw (as yellow circle) to
take off the Rod Cover.
3. Remove the Rod.
Note: - Avoid touching the Rod when you
disassemble or assemble it.
- Please notice the Rod Module's direction
when you assemble it (as picture A shown).
- Ensure left edge of Rod Module contact
with the Engine base's blocks.
- Rod Spring must hook in the position as
picture B shown.
2-15 Disassemble Focus
Ring
1. Unscrew 3 screws (as red circle) to
disassemble the Focus Ring.
ES526/EX536/EX531/CB2800/ES526L/EX536L/DS316L
A
Focus Ring
Rod spring
Rod cover
Rod
B
Confidential
2-10