Disassembly Process; Equipment Needed & Product Overview - Optoma ES526 Service Manual

Chapter 2

Disassembly Process

2-1 Equipment Needed & Product Overview
1. Screw Bit (+): 105
2. Screw Bit (+): 107
3. Screw Bit (-): 107
4. Hex Sleeves 5 mm
5. Tweezers
6. Projector
* Before you start: This process is protective level II. Operators should wear electrostatic chains.
* Note: - If you need to replace the main board, you have to record the lamp usage hour.
- As the disassembly process of EX536/ES526/EX531/CB2800/ES526L/EX536L/DS316L is
the same, we take ES526 for example here.
ES526/EX536/EX531/CB2800/ES526L/EX536L/DS316L Confidential
2-1