Sony TRINITRON KV-36FS10 Service Manual page 30

KV-32FS10/32FV15/32XBR250/34FV10/34FV15/34FV15C/34FX250C/34FV15K
34FV15T/36FS10/36FV15/36XBR250/38FX250/38FX250C/38FX250T/38FV15K
V LINEARITY (VLIN), V CORRECTION (VSCO), PIN AMP
(PAMP) AND TRAPEZIUM (TRAP) ADJUSTMENTS
1. Input a cross-hatch signal.
2. Set to Service adjustment Mode.
3. Select VLIN, VSCO, PAMP, and TRAP with
4. Adjust with and for the best picture.
5. Write the memory by Pressing
V LINEARITY(VLIN)
VS CORRECTION (VSCO)
PIN AMP (PAMP)
TRAPEZIUM (TRAP)
V ANGLE (VANG), V BOW (VBOW), UPPER PIN (UCPN)
AND LOW PIN (LCPN) ADJUSTMENTS
1. Input a cross hatch signal.
2. Set to Service Adjustment Mode.
3. Select VVANG, VBOW, UCPN, and LCPN with
4. Adjust with and for the best picture.
5. Write the memory by Pressing
Please use VANG data from 3 12. Adjust from 3
V ANGLE (VANG)
V BOW (VBOW)
UPPER PIN (UCPN)
LOW PIN (LCPN)
OSD POSITION ADJUSTMENT (DISP)
1. Input a color bar signal.
2. Set to Service adjustment Mode.
3. Select DISP with
and .
4. Adjust with
5. Write into the memory by pressing
then .
ROTATION COIL ADJUSTMENT
1. Input a monoscope signal.
2. Push Menu button on the Remote (RM-Y171).
3. Select "Set Up" Mode.
4. Select "Tilt Correction". Confirm that number (0) color
changes to red.
5. Push > (+) on the Remote (RM-Y171). Confirm that number
increases up to +5 and picture rotates clockwise.
6. Push . (+) on the Remote (RM-Y171). Confirm that number
decreases up to -5 and picture rotates counterclockwise.
7. Push > (+) on the Remote (RM-Y171). Return to 0.
SET-UP
and .
then .
to 12 only.
Channel Set-up
Favorite Channel
Video Label
Language: English
X
Tilt Correction : 0
— 30 —
and .
and for the bar center.
SERVICE VP AFC 0
1000 0000
|||||||||||||||------------
+5
0
Menu
-5
then .