Table of Contents
Advertisement
overview
rear Side
i
h
g
Item
Micro SD Memory
a
Card Compartment
Audio terminal
b
Reset Button
c
Lightning protective
d
grounding port
14_ overview
a
b
f
Compartment for the Micro SD memory card.
AUDIO OUT
Used to connect to speakers.
AUDIO IN
Used to connect to a microphone.
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
If you reset the camera, the network settings will be adjusted so that
J
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
Used to discharge the lightning current safely outside in order to protect the
camera.
c
d
e
Description
Advertisement
Table of Contents
