Connecting A Usb Device - Sony SVD1321 User Manual

User Guide
How to Use
Windows 8: The Basics
Parts Description
Setup
Network / Internet
Connections
Settings
Backup / Recovery
Security
Other Operations
Notifications
Troubleshooting
List of Topics
Personal Computer
VAIO Duo 13
SVD1321
Back Back to Top

Connecting a USB Device

You can connect a Universal Serial Bus (USB) device such as a mouse, floppy disk
drive, speaker or printer to your VAIO computer.
Installation of the device driver supplied with the USB device may be required
when connecting.
Refer to the manual that came with the device for more information.
1. Choose the USB port (
2. Plug the USB device cable (
Note
You may need to install the driver supplied with your USB device before use. Refer to
the manual that came with the USB device for more information.
In order to print documents, be sure the USB printer is compatible with your version
of Windows.
Before disconnecting USB speakers from your VAIO computer, stop DVD or music
playback or turn off the computer. If you disconnect the USB speakers during
playback, it may cause a malfunction.
For information on how to remove a USB device, refer to the manual that came with
the device.
To protect your VAIO computer and/or USB devices from damage, observe the
following:
When moving your VAIO computer with USB devices connected, avoid exposing
the USB ports to shock or impact.
Do not put your VAIO computer in a bag or carrying case with USB devices
connected.
Hint
The USB ports on your VAIO computer are compliant with the USB 2.0 standard
and/or USB 3.0 standard.
USB ports that are compliant with the USB 3.0 standard are identifiable by their blue
color.
In addition to the USB 2.0 standard transfer modes, the USB 3.0 standard specifies
the following transfer mode:
SuperSpeed: Transfer rate of 5 Gbps.
293
) you prefer to use.
) (not supplied) into the USB port.
Search
Print
Go to Page Top