Download Print this page
Sennheiser ActiveGard SH 300 User Manual
Sennheiser ActiveGard SH 300 User Manual

Sennheiser ActiveGard SH 300 User Manual

Activegard

Advertisement

Quick Links

ActiveGard™
Acoustic burst
Dialing
Talking
ActiveGard™
is an active system, which automatically compresses an incoming sound
that is too loud. As opposed to cutting the volume signal off, it actually compresses the
incoming signal to a safe level without distorting it. It also reacts in just a few milliseconds,
which is much faster than the human ear can even recognize.
Traditional systems
work by simply clipping high-volume peaks. This, in turn, can
create severe, increasing, and uncomfortable distortion during a phone call. Since the
Traditional
systems:
potentially dangerous energy of the volume signal is only reduced and not removed,
the headset speakers are still likely to transmit a very high, unpleasant, and maybe
even unsafe sound level.
ActiveGard™
Dialing
Talking
Traditional
systems:
www.senncom.com
SH 300_User manual.indd 1
Compression
Peak-clipping
Compression
Acoustic burst
Peak-clipping
SH 300
User
Manual

Technical data

Transmission data
Microphone ...............................................Noise Canceling
Frequency response ................................100 Hz – 3400 Hz
Sensitivity .................................................-34 dB
Distortion ..................................................Less than 1%
Receiving data
Impedance .................................................300 Ω
Frequency response ................................300 Hz – 3400 Hz
Sound pressure max ...............................104 dB SPL limited by ActiveGard™
Distortion ..................................................Less than 1%
Weight of headset ...................................29 g / 0.67 oz
Wearing style ...........................................Over-the-ear (left or right ear)
Personal fit ................................................3 adjustment speaker rings
Cable length ..............................................1 m / 3.3 ft Kevlar
Connector ..................................................Easy Disconnect
Ear-cap size ...............................................Regular ø 20 mm / 0.78 inch
Accessories included
Carry bag, headset storage hook, clothing clip and microphone windscreen.
Safety instructions
· Avoid listening at high volume levels for long periods since this leads to permanent hearing defects.
· Keep children away from the SH 300. When playing, children can be strangled by the cables.
· Do not use the SH 300 in a damp or dusty environment.
www.senncom.com
SH 300
User
Manual
reinforced
®
09/05/07 11:04:52

Advertisement

loading
Need help?

Need help?

Do you have a question about the ActiveGard SH 300 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sennheiser ActiveGard SH 300

  • Page 1: Technical Data

    · Avoid listening at high volume levels for long periods since this leads to permanent hearing defects. · Keep children away from the SH 300. When playing, children can be strangled by the cables. · Do not use the SH 300 in a damp or dusty environment.
  • Page 2 2 cm Operating elements To disconnect the headset from the “Easy Disconnect” Microphone boom arm facility, press one of the two release buttons (A). Hinged speaker The two halves of the “Easy Disconnect” facility auto- Ear-cap adapters matically disconnect. Adapting the headset to your ear If the pre-assembled medium size ear-cap adapter Hinge the speaker to open position.