Table of Contents
Advertisement
POWER 650 MOSFET SPECIFICATIONS
Power Ratings: 4 Channel
4 Ohms:
125 watts per channel continuous power into 4
Ohms, 4 channels driven, from 20 to 20,000Hz, with
less than 0.05% THD + N (Total Harmonic Distortion
& Noise).
2 Ohms:
160 watts per channel continuous power into 2
Ohms, 4 channels driven, from 20 to 20,000Hz, with
less than 0.1% THD + N.
Power Ratings: 2 Channel (bridged)
4 Ohms: 325 watts per channel continuous power into 4
Ohms, 2 channels driven, from 20 to 20,000Hz, with
less than 0.05% THD + N.
Frequency Response: 20 to 20,000Hz, ± .5dB.
Bandwidth: 15 to 20,000Hz, ± 3dB.
Damping Factor: greater than 200 at 50Hz.
Slew Factor: greater than 2.5.
Slew Rate: greater than 10 volts per microsecond.
Protection
The Punch also employs thermal switches which protect the
amplifier from overheating damage.
Fuses are provided for speakers which are directly connected
with no crossover components.
See page
for further details on internal fusing.
Dimensions
18 3/10" long x 8 1/10" wide x 2%" high, exclusive of knobs and
wiring.
19 3/10" long x 8 1/10" wide x 2%" high, minimum mounting
requirements.
Note:
Achieving ultimate performance from Rockford
products is our main concern. Therefore research and
development of a new product doesn't end when it
finally reaches production. For this reason Rockford's
specifications are subject to change without notice.
-2o-
Fosgate
Hide quick links:
Advertisement
Table of Contents
