Advertisement
Advertisement
Table of Contents
Related Manuals for Fishman PRESYS BLEND ONBOARD PREAMP
Summary of Contents for Fishman PRESYS BLEND ONBOARD PREAMP
- Page 1 USER GUIDE PRESYS BLEND ONBOARD PREAMP...
- Page 2 Presys Blend Quick Start 1. Set the controls • Set volume, mic blend and notch off. Set the bass, middle and treble controls to center. 2. Plug in • Connect the Presys Blend to an amplifi er or PA with a ¼-inch instrument cable.
- Page 4 Presys Blend Controls Volume • For the cleanest signal, set the volume knob as high as possible, without causing distortion or feedback. Bass • Boost here to add depth and weight to the sound of the guitar. Middle • Turn the middle knob all the way left for a smooth “scooped out” tone at high volume levels.
- Page 5 To conserve power, unplug the instrument and turn off the tuner when not in use. Replace the battery by fl ipping open the preamp body using the latch located above the Fishman logo. Be sure to observe the correct polarity during this installation.
- Page 6 Sample EQ Settings Fingerstyle “Scooped” Mid This will add fullness to the bass This setting emphasizes extreme bass and defi nition to the treble. and treble...
- Page 7 Strummer Cut Through the Mix A good setting for strumming chords. When you need to be heard through a loud band.
- Page 8 www.fi shman.com 513-300-145 Rev B 7-09...