Connection Manager - Nokia N85 User Manual

To start a search for available WLANs, select the status
and Search for WLAN. To set WLAN scanning off, select
the status and select
To access the WLAN wizard application in the menu,
press , and select
WLAN internet access points
Press , and select
Select Options and from the following:
Filter WLAN networks
●
list of found networks. The selected networks are
filtered out the next time the application searches
for WLANs.
Details — View the details of a network shown in
●
the list. If you select an active connection, the
connection details are displayed.
Define access point
●
point (IAP) in a WLAN.
Edit access point
●
IAP.
You can also use connection manager to create
internet access points.
connections," p. 38.
Operating modes
There are two operating modes in Wi-Fi WLAN:
38
infrastructure and ad hoc.
WLAN scanning off.
Tools WLAN wiz..
>
Tools WLAN wiz.
>
— Filter out WLANs in the
— Create an internet access
— Edit the details of an existing
See "Active data
The infrastructure operating mode allows two kinds of
communication: wireless devices are connected to
each other through a Wi-Fi/WLAN access point device,
or wireless devices are connected to a wired LAN
through a Wi-Fi/WLAN access point device.
In the ad hoc operating mode, devices can send and
receive data directly with each other.

Connection manager

Active data connections
Press , and select Tools
mgr. Active data connections.
>
In the active data connections view, you can see the
open data connections:
data calls
packet data connections
WLAN connections
Note: The actual invoice for calls and services
from your service provider may vary, depending on
network features, rounding off for billing, taxes, and
so forth.
To end a connection, select
close all open connections, select
Disconnect all.
Connectivity Conn.
> >
Options > Disconnect. To
Options
>