Table of Contents
Advertisement
TRI-BASE SANDER
STOCK No.63303
PART No.PT260V
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS TOOL.
08/2000
GENERAL INFORMATION
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which
should be kept with the machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any operation of
the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both machine and operator
safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool
policy of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Related Manuals for Draper PT260V
Summary of Contents for Draper PT260V
-
Page 1: General Information
08/2000 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read before any operation of... -
Page 2: Table Of Contents
Getting to Know Your Tri-Base Sander ..............5 Operation & Use ....................6-7 Maintenance and Part Replacement/Optional Accessories ......8 DECLARATION OF CONFORMITY Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock No:- 63303 Part No:- PT260V Description:- Tri-base Sander. -
Page 3: Specification/Guarantee
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you produce a dated receipt or invoice to verify your proof of purchase within the 12 month period. -
Page 4: Power Supply/Wiring Diagram
(i.e. red). Fuse covers are available from your Draper Tools stockist. If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be suitably prepared and the correct type of plug fitted. -
Page 5: General Safety Instructions
IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you. -
Page 6: Getting To Know Your Tri-Base Sander
GETTING TO KNOW YOUR TRI-BASE SANDER ✕✌ ✘✌ ✚✌ ✗✌ ✙✌ ✖✌ ✛✌ Fig.1. FIG.1. 1. Rating Plate. Dust Extraction. 2. Hand Grip. BS Moulded Plug & Cable. 3. On/Off Switch. Base Pad. 4. Variable Speed Knob. - 5 -... -
Page 7: Operation & Use
OPERATION & USE IMPORTANT: Make sure that the mains voltage matches the voltage stated on the machines rating plate. THE SWITCH The machine is set to operation by pressing the switch ✪✌ (Fig.2.). SPEED REGULATION Depending on the application, the rotation speed can be varied by turning the knurled button ✫✌... -
Page 8: Operation & Use
OPERATION AND USE Cont. DUST EXTRACTION Fig.5. Draper Tools recommends that the dust extraction facility on this model is used in conjunction with a suitable vacuum cleaner. (See Fig.4.). Recommended Draper models:- WDV24, WDV1100 and SWD1100. ALWAYS DISCONNECT FROM THE POWER SUPPLY BEFORE CLEANING OR MAINTAINING. -
Page 9: Maintenance And Part Replacement/Optional Accessories
MAINTENANCE AND PART REPLACEMENT Regular inspection and cleaning reduces the necessity for maintenance operations and will keep your tool in good working condition. The tool bearings are life long lubricated. The motor must be correctly ventilated during tool operation. For this reason avoid blocking the air inlets with hands. - Page 10 NOTES - 9 -...
- Page 11 NOTES - 10 -...
- Page 12 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the PT260V and is the answer not in the manual?
Questions and answers