Operation Of Appliance; Troubleshooting - Crystal Acoustics TR - 100 Manual

O P E R A T I O N O F A P P L I A N C E
The TR-60 system is activated by the On/Off switch on the T-100.
The R-60W is activated automatically.
T R O U B L E S H O O T I N G
The power indicator doesn't light up on the T-100:
1. Check that the power cable is in the socket
2. Check that all cables are properly connected according to this instruction manual
3. Check that the On/Off switch is turned on
The power indicator doesn't light up on the R-60W:
1. If you placed the receiver amplifier on a power strip, check that the power cable is
in the socket and if the power switch of the strip is on.
2. Check that the power indicator of the T-100 is on
3. Make sure there's audio signal at the T-100 transmitter input or move the
transmitter switch to OFF and than ON again.
4. If the distance that you have placed the R-100Ws from the T-100 is very large,
try a smaller distance according to specifications so that connection is established.
Also, if bulky objects between devices cause interference, try moving them around.
No sound is coming from the loudspeakers:
1. Check that the power indicator on the R-60W is lit up
2. Check that all the R-60W cables are properly connected
13