User Maintenance Instructions - Conair 20 PIECE HC220GBC Instructions For Care And Use

For the front to the crown, cut the hair against
the direction in which it grows.Then even it up
with the sides.
For a flat top, use the flat comb, not the
attachment comb. Just cut hair on top of the
head over the flat comb. (Fig. 2).
To taper hair down to the neckline, use
attachment comb #1. Comb hair and check for
uneven spots. Outline sideburns and neck ar-
eas (see "Outlining").
Fig 2
USER-MAINTENANCE
INSTRUCTIONS
CARE OF YOUR CLIPPERS
IF YOU DETERMINE THAT BLADE
ALIGNMENT IS INCORRECT:
Conair hair clippers are carefully inspected
®
to insure that the blades are in perfect
alignment. You will need to realign the blades
after removing them for cleaning or replace-
ment, or if they should be knocked out of
alignment. How can you tell if the blades need
realigning? Simply match them up, point for
point, to conform with Fig. 3.
Fig 3
Bottom Blade
Top Blade
To prevent the clipper from contacting the skin
or cutting too closely, make certain that the
end top blade teeth are
bottom blade.
/
1 1
" to
32
/ " to / " back from
1 1
32 16
/
"
16