Side Panel And Pedal Box Assembly; Modesty Panel Assembly - Behringer Concert CDP2400USB Assebly Instructions

CONCERT CDP2400USB Assembly Instructions
2.

Side Panel and Pedal Box Assembly

1) Position the Pedal Box 4 against the Left Side Panel
each screw.
2) Position the Pedal Box 4 against the Right Side Panel
each screw.
3) You can find the pedal cable in the Pedal Box
3.

Modesty Panel Assembly

1) Position the holes of the Modesty Panel
fasten the top of the Modesty Panel.
2) Use three screws 8 with attached washers to fasten the bottom of the Modesty Panel.
3) Use the cable clamp to take up any slack in the pedal cable.
2 and then use two screws
4 and then use two screws
4 . Untie and straighten out the cable attached to the bottom of the Pedal Box.
against the holes of the side panel brackets and then use two screws
5
7 to fasten the side panel. Finally, attach a plastic cap to
7 to fasten the side panel. Finally, attach a plastic cap to
with attached washers to
5
3