Introduction; Before You Get Started; The User's Manual - Behringer Eurolight LD6230 User Manual

4
EUROLIGHT LD6230 User Manual

1. Introduction

As a BEHRINGER EUROLIGHT LD6230 owner, you have a high-end dimmer pack
at your hands. It was designed to answer to the high demands of lighting
professionals working in television, theatres and live events, and is therefore
universally applicable.
The EUROLIGHT LD6230 provides all necessary features for controlling your light
show, yet it is clearly laid out and easy to use. It gives you the choice between
analog and digital DMX control. Comprehensive LEDs let you easily detect signal
problems so you can effortlessly eliminate them as soon as they occur.
◊
The following user's manual is intended to familiarize you with the
unit's control elements, so that you can master all the functions.
After having thoroughly read the user's manual, store it at a safe place
for future reference. Installation Instructions supplement the user's
manual and are included in the shipment.
◊
A qualified professional needs to be present during the unit's
installation and initial operation. More information about this topic is
covered under Installation instructions.

1.1 Before you get started

1.1.1 Shipment
The LD6230 was carefully packed at the assembly plant to assure secure
transport. Should the condition of the cardboard box suggest that damage
may have occurred please inspect the unit immediately and look for physical
indications of damage.
◊
Damaged units should NEVER be sent directly to us. Please inform
the dealer from whom you acquired the unit immediately as well
as the transportation company from which you took delivery.
Otherwise, all claims for replacement/repair may be rendered invalid.
1.1.2 Initial operation
Please make sure the unit is provided with sufficient ventilation, and never place
the EUROLIGHT on top of an amplifier or in the vicinity of a heater to avoid the risk
of overheating.
◊
Please make sure that the unit is grounded at all times. For your own
protection, you should never tamper with the grounding of the cable or
the unit itself.
◊
To avoid damage to your equipment, always make sure your dimmer
pack is disconnected from the mains before you connect or disconnect
spotlights or other lighting paraphernalia.
◊
Make sure that only sufficiently qualified persons install and operate
your LD6230. To avoid damage or altering of its performance through
electrostatic discharge, make sure that all people handling the LD6230
are properly grounded both during and after the installation.
1.1.3 Rack installation
The LD6230 requires two height units (2 HU) when installed in a 19-inch rack.
Please make sure to leave an extra 4 inches (10 cm) of space behind the unit
for wiring.
Please use M6 machine screws and nuts to install your LD6230 into a rack.
1.1.4 Warranty
Please take a few minutes and send us the completely filled out warranty
card within 14 days of the date of purchase. You may also register online at
behringer.com. The serial number of your EUROLIGHT LD6230 ( (15) ) needed for
registration is located at the rear panel of the unit. Failure to register your
product may void future warranty claims.

1.2 The user's manual

The user's manual is designed to give you both an overview of the controls,
as well as detailed information on how to use them. In order to help you
understand the links between the controls, we have arranged them in groups
according to their function. If you need to know more about specific issues,
please visit our website at http://behringer.com.