Table of Contents
Advertisement
Digital Performer and Logic crash when used at 96 kHz
This problem (missing reset for changed number of channels in Double Speed operation) is
solved by the special ASIO driver 'Hammerfall DSP ASIO 96 kHz'. Select this driver within
the corresponding program when working in 88.2 and 96 kHz.
16.2 Installation
The dialog 'New hardware component found' does not appear:
Check whether the CardBus card is completely inserted into the PCMCIA slot, or the PCI
interface is correctly inserted in the PCI slot.
The card and drivers have been installed correctly, but playback does not work:
Check whether the Hammerfall DSP has been selected as current ASIO device.
The following symptoms are typical for PCI related problems:
When booting the control panels are displayed too big, or spread across the whole screen
Software or OS crash as soon as the card is used
These problems were reported with older computers (prior to G3). They can be solved in most
cases by simply using a different slot, or by exchanging slots with other PCI cards (like SCSI
controllers or graphics cards).
17. Software and Hardware Compatibility
Hammerfall DSP is fully compatible with PCI bus version 2.1.
The Hammerfall series is compatible to all major ASIO applications, like Cubase VST, emagic
Logic, Opcode Studio Vision PRO, Prosoniq SonicWORX, TC SPARK, Peak from Bias, Motu
Digital Performer, Max/MSP from Cycling '74 and Super Collider.
As far as we are aware, the Hammerfall DSP digital inputs and outputs are fully compatible
with all devices with SPDIF or AES/EBU interfaces.
User's Guide HDSP System Digiface © RME
26
Hide quick links:
Advertisement
Table of Contents
