Mounting Your Btc - Vivanco BTC 700 User Manual

Bluetooth media center
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
2.
When the battery is low, the device beeps once every 20 seconds and the Blue and
Red LEDs alternate every 3 seconds, charge the battery as described above.
Note that, over-charging will reduce battery life. If a fully charged battery is left unused, it
will lose power over time. Extreme temperature (either too hot or too cold) will also affect
its ability to charge, capacity, and lifetime.

2.2 Mounting your BTC 700

It is easily to mount on the dashboard of the car with mounting dock and double-side
sticker, or use Sun-visor Clip to fix the BTC 700 device on the sun-visor over driver's seat.
It can be more flexible to use the BTC 700 in the car or carry out to the office and home.
Fixing Vivanco BTC700:
1.
Tear the paper off from the Double-side sticker, stick it on the back-side of the
mounting dock and then fix it in front of driver seat on the vehicle. Plug the clasp of
the mounting dock to the hole that is on the back of the device, and then rotate
clockwise until the mounting dock is fixed completely. You can also rotate anti-
clockwise to take down the device. (Referring to Figure 3 and 4)
Hole
Figure 3: Back of the device
2.
If using the Sun-visor Clip, rotate clockwise until the Sun-visor Clip is fixed
completely, then clip to the sun visor in your vehicle. Note that, the microphone of
the BTC 700 must aim at the sound bearing. (Referring to Figure 5)
Figure 4: Fixing the mounting dock
8
Clasp
Double-s

Advertisement

Table of Contents
loading

Table of Contents